Assembly And Installation, Rpa | Chief Manufacturing LCD2C manual

Installation Instructions						LCD2C
Assembly And Installation
For RPA Models Only
WARNING: Failure to provide adequate structural strength
for this component can result in serious personal injury or				6
damage to equipment! It is the installer’s responsibility to
make sure the structure to which this component is attached				(G) x 4
can support five times the combined weight of all equipment.
Reinforce the structure as required before installing the
component.				(J) x 4	7	(I) x 2
1. Mark the six mounting hole locations through the ceiling				(J) x 4	7	(I) x 2
1. Mark the six mounting hole locations through the ceiling
plate. (See Figure 1)			RPA
2. Drill six 7/32" holes.					A
					A
3. Use six fasteners (not provided) to mount the ceiling plate
to the appropriate structural ceiling. The 1-1/2" NPT pipe
must be pointing down. (See Figure 1)
				(H) x 4	8	E
1	X6	2	X6	(H) x 4
1	X6	2	X6
					Figure 2
			7. Slide both projector arms (A) onto the 1-1/2" vertical pipe
				section and secure using two 5/16-18 x 3/8" set screws (I)
				on each arm.
			8.	Thread 1-1/2" safety nut (E) onto threaded end of the 1-1/2"
				pipe section.
			9.	Mount projector hanging bracket to your projector (see RPA
				instructions).
3			10. Partially thread 10-24 thumbscrews onto 10-24 studs at top
3	X6			of hanger bracket plate. The quantity of thumbscrews may
				vary from three to six.

Figure 1

4.Thread the 1-1/2" NPT pipe (C) into the ceiling plate and tighten securely.

5.Secure NPT pipe to ceiling plate using one 5/16-18x3/8" set screw (I).

6.Attach RPA to projector arm (A) using four 1/4-20 X 1-1/2" carriage bolts (H), four 1/4-20 acorn nuts (G) and 1/4" flat washers (J). (See Figure 2)

11.Align studs with key slots of RPA, slide RPA into place, and secure RPA by tightening thumbscrews.

12.Adjust projector for correct registration.

For RPM Models Only

1.Proceed with Steps 1-5 under For RPA Models Only.

2.Place RPM on its top so that four screw holes are visible through the square in the RPM base. (See Figure 3)

3.Insert four 1/4"-20x1-1/2" (L) button head cap screws into the bottom of the RPM. (See Figure 3)

NOTE: The RPM base is not shown in Figure 3 for clarity only. It should NOT be removed for this installation process.

LCD2C specifications

The Chief Manufacturing LCD2C is a premium display mount designed for the dynamic needs of modern workspace environments. Known for its exceptional engineering and innovative features, the LCD2C caters to various applications ranging from office settings to classrooms and conference rooms.

One of the primary features of the LCD2C is its adjustable height and tilt options, allowing users to achieve the perfect viewing angle. This flexibility is particularly beneficial when accommodating multiple viewers or when the display is used in collaborative settings. The mount supports a wide range of display sizes, typically accommodating screens from 32 inches up to 65 inches, catering to diverse display needs.

The Chief LCD2C is built with robust steel construction, ensuring durability and stability for heavy displays. This construction is complemented by a sleek design that minimizes visual clutter, contributing to a professional appearance in any environment. The mount also features a quick-release latch that simplifies the installation and maintenance process, making it user-friendly for AV technicians and end-users alike.

Technologically, the LCD2C employs Chief’s innovative micro-adjustment features. This allows for precise alignment during installation, ensuring that displays are perfectly level and positioned. The mount also incorporates integrated cable management, which helps keep all wiring organized and out of sight, contributing to a clean, professional look.

Another notable characteristic of the LCD2C is its compatibility with Chief's extensive line of accessories. This flexibility enables users to customize their mounting solution further, accommodating additional hardware such as shelves, camera mounts, or even sound systems. The modularity of this system ensures the mount can evolve with the changing needs of a workspace.

Furthermore, the LCD2C boasts a straightforward installation process, thanks to its pre-assembled components and well-designed user guides. This allows for quicker deployment of display solutions, minimizing downtime in work environments.

In summary, the Chief Manufacturing LCD2C epitomizes reliability, flexibility, and user-centric design for display mounting solutions. With features like adjustable height and tilt, robust construction, micro-adjustments, and integrated cable management, it stands out as an ideal choice for professionals seeking an efficient and aesthetically pleasing display mount. Whether for collaboration, presentations, or information sharing, the LCD2C is a compelling solution in today’s technologically driven workplaces.