2.
3.
C |
Use a Philips screwdriver to loosen four screws on the adaptor.
Hold the adaptor and turn part (C) in the arrow direction to loosen it by 5 mm (*).
Installation
4. | Insert the adaptor into the water tap, |
| and tighten the screws while lifting up |
| the adaptor. |
5. | Turn part (C) in the arrow direction to |
C | tighten it. |
|
6.
E |
While holding down part (E), connect the water supply hose to the adaptor. Then, release part (E). The hose fits into the adaptor with a clicking sound.
English 21
2017/12/11 14:14:28