Operations
Control panel
| 11 |
02 | 09 |
|
|
| 01 |
|
|
| 08 | 10 |
|
|
|
|
|
| ||
|
| 03 | 04 | 05 | 06 | 07 |
|
01 | Course Selector Turn the dial to select a course. |
|
|
|
| ||
02 | Display | The display shows current course information and estimated time | |||||
remaining, or an information code when a problem occurs. |
| ||||||
|
|
| |||||
03 
Temp. Press to change the water temperature for the current course.
04 Rinse | Press to change the rinse count for the current cycle. You can set the | |
rinse count to a max of 5. | ||
| ||
|
| |
| Press to change the spinning speed for the current course. |
•Rinse Hold (No indicator): The final rinse cycle is suspended so that the laundry remains in the water. To unload the laundry, run a drain or spin cycle.
05 | Spin | • | No Spin | : The drum does not spin after the final drain cycle. | |||
• | Spin Only | : To run the Spin Only cycle, press Spin for 3 | |||||
|
| ||||||
|
|
| seconds. When the cycle time and spinning speed appear, press | ||||
|
|
| Spin repeatedly until a desired spinning speed is selected. | ||||
|
|
| Then, press Start/Pause |
| to start the cycle. The spinning time | ||
|
|
|
| ||||
|
|
| depends on the selected cycle. | ||||
|
|
|
|
| |||
06 | Dry Level | Press this button to select proper drying option. | |||||
|
|
|
|
| |||
07 | Bubble Soak | Press to activate/deactivate the Bubble Soak function. This function | |||||
helps remove a wide variety of stubborn stains. | |||||||
|
| ||||||
Before you start
English 31
2018/3/8 15:03:55