Chauvet 330SR manual Lamp Replacement

Page 3

EN	Legend™ 330SR Spot QRG

Lamp

Replacement

1.Turn the fixture off and disconnect it from power.

2.Wait at least 15 minutes for the lamp to cool down.

3.Remove back cover using the 2 Phillips-head ¼-turn screws.

4.Orient the rear of the product so that the fan is facing downward.

5.Using the lamp base, push the lamp down against the spring clips located on the bottom, and then roll the lamp out the top.

6.Remove the 2 wires connected to the lamp by the spade connectors.

7.Reverse steps 3 thru 6 above to install the new lamp.

Please refer to the User Manual for more detailed instructions with images.

¼-turn

Phillips-head

Screws

	Lamp	Spade
	Lamp	Connectors
		Connectors

Spring

Clips

3

Image 3

Contents Quick Reference Guide Disclaimer Safety Notes Contact What is Included Lamp Replacement Replacing MountingControl Panel Description AC PlugMain Level Programming Levels Description Menu OptionsResets zoom/frost/focus/prism functions Resets lamp timer toShutter Resets shutter function to home position Color/CMY Resets color wheel/color flags to homeChannel Function Percent/SettingDMX Values Mode1Cont Control CMY Speed Channel Function Value Percent/SettingMode2 Fine DimmerMode2 Cont Preset Color Pan/Tilt MacroSpeed Color Macro Notas de Seguridad Contacto Qué va Incluido Sustitución de la Lámpara Enlace DMX Corriente AlternaBotón Función Diagrama de MontajeMontaje Descripción del Panel de ControlNivel Principal Niveles de Programación Descripción Opciones de MenúZoom/Frost/Focus Display Setting Backlight Auto OffFactory Setting Auto TestValores DMX Canal Función Valor Porcentaje/ConfiguraciónRotación de Rotación de GoboFoco Rueda de PrismaAtenuador Fino CanalValor Cont000 ó Abrir 008 ó Gobo 015 ó 022 ó 029 ó 036 ó Preajuste Color MacroLateral/Inclinación Velocidad Macro DesplazamientoMacro de Color ÀPropos de ce Manuel Contact Ce qui est InclusClause de Non- Responsabilité Consignes de Sécurité Remplacement De la Lampe Prise CA Remplacement Du FusibleAlimentation RaccordementFonction Description du Tableau de CommandesMontage Schéma de MontageNiveau Principal Niveaux de Programmation Description Options du MenuDisplay Setting Options du Menu suiteRemain Exit Pourcentage/Configuration Valeurs DMXCanal Fonction Suite Valeurs DMX suiteEffet Dépoli CommandeCanal Fonction Valeur Pourcentage/Configuration Gradateur FinVitesse de CMJ Mode2 Suite Prisme Rotation deCouleur Prédéfini Macro de Pan/TiltVitesse de Macro De Pan/TiltMacro de Couleur World Wide Web General Information Technical Support