Monster Cable HTS2600 owner manual Rack Mounting Your PowerCenter

Page 20

HOOK-UP GUIDE

Rack Mounting Your PowerCenter

This Monster PowerCenter includes two “rack ears” mounting plates for installation into a standard size equipment rack.

A)Remove your PowerCenter trim covers using a 3⁄32 or 2.5 mm Allen (Hex) key (not included). Turn each Allen screw counter-clockwise until the screw is completely removed.

B)Align one rack ear over the two holes on the left side of the PowerCenter. Using the Allen key, turn the two screws clockwise until tight. Repeat this step for the right side of the PowerCenter.

C)Place the PowerCenter into the rack and align the holes with the holes of your rack. Insert rack screws (not provided) and turn clockwise until tight.

Rack Ears

15

Image 20

Contents HTS2600 Table of Contents Important Safety Information Page Proper Grounding and Installation Important Note Proper Power and ProtectionPage Noel Lee MONSTER’S Exclusive T2 Technology Or above 132VrmsMONSTER’S Patented Clean Power Stages Minds Behind the Monster Powercenter Design Monster HTS2600 Powercenter Features Front ViewHTS 2600 Powercenter Features Page Video Outlets HOOK-UP GuideVideo Outlet Hook-Up Analog Audio Outlet Hook-Up Analog Audio OutletsUltra-High Current Audio Outlet Hook-Up High Current Audio OutletsCoaxial Connections Hook-Up Phone Connections Hook-Up Protect Phone Line Connections as followsRemote DC In Control Hook-Up Remote AC In Control Hook-UpRack Mounting Your PowerCenter Troubleshooting Symptom Possible Cause RemedyComponent is Unswitched LED Timed On HTS 2600 Powercenter VoltsHTS2600T2MAN