Samsung VCC8850H3R/XEE, VCC8850H3B/XEE manual Troubleshooting, Problem Solution

Page 15

troubleshooting

PROBLEM

SOLUTION

 

 

Motor does not start

• Check cable, pulg and socket.

• Leave to cool.

 

 

 

Suction force is gradually

• Check for blockage and remove.

decreasing

 

 

 

Cord does not rewind

• Pull the cord out 2-3m and push down the cord rewind

fully

button.

 

 

Vacuum cleaner does not

• Check hose and replace if required.

pick up dirt

 

 

 

Low or decreasing

• Please check filter and, if required, clean as illustrated in the

instructions. if filters are out of condition change them to new

suction

ones.

 

 

 

Body overheating

• Please check filters, If required clean as illustrated in the

instruction.

 

 

 

 

• Please decrease power suction.

Static electicity discharge

• This can also occur when air in the room is very dry.

 

Please ventilate the room to air humidity become a normal.

 

 

This Vacuum cleaner is approved the following.

EMC Directive : 2004/108/EEC

Low Voltage Directive : 2006/95/EC

04 TROUBLESHOOTING

troubleshooting _15

Image 15
Contents Vacuum Cleaner For Residents of the United Kingdom only Safety informationSafety Information Other Symbols UsedImportant Safeguards Contents Assembling the cleaner REMOTE-CONTROL Type Infrared Control Optional Operating the cleanerPower Cord On/off switch Power controlBODY-CONTROL Type Optional BodyPipe Using accessoryAccessory Optional Maintain tools and filterParquet Master Brush Option Power PET Plus Brush OptionMaintain Floor Tools Step Brush OptionBlanket Brush Option PET Brush OptionEmptying the dust bin When to Clean the Dust Pack Cleaning the Dust PackFilter from the dust pack Water Cleaning the Dust PackChange the battery optional Cleaning the Outlet FilterProblem Solution TroubleshootingCode No. DJ68-00597A REV0.0
Related manuals
Manual 84 pages 19.5 Kb