Draper WH ST 400, WFH ST 2000, WH 3D SMS Flatscreen Wall Mounts for Plasma Displays by Draper

Page 2

SMS Flatscreen Wall Mounts for Plasma Displays by Draper

Page 2 of 4

Specifications—SMS Flatscreen Wall Mounts for Plasma Displays

SMS Flatscreen Wall Mounts for Plasma

Displays, model (WH 3D/WH T 2/WH ST 400/WH ST 1150/WFH ST 2000/WH ST), by Draper, Inc., of Spiceland, Indiana.

Universal Plasma Bracket: shall be provided for any plasma display through 50" diagonal and under 100 lbs. Bracket shall be of steel, with anodized aluminum fi nish, and shall feature keystone-shaped mounting panel which will slide into steel mating bracket on SMS Flatscreen Mounts for easy, safe and sturdy mounting. Universal Plasma Bracket to have both landscape and portrait orientation capabilities. Hardware for attaching bracket to plasma display provided by Draper—a full set of screws, washers, extenders, spacers, Extension Plates and Extension Arms to fit virtually any plasma model. Universal bracket shall be compatible with all SMS Flatscreen Mounts for Plasma Displays.

Plasma-specific Bracket: shall be provided for any plasma display over 50" diagonal and over 100 lbs. Bracket shall be of steel, with anodized aluminum

nish, and shall feature keystone-shaped mounting panel which will slide into steel mating bracket on all SMS Flatscreen Mounts for easy, safe, and sturdy mounting. Hardware for attaching bracket to plasma display provided by Draper. Bracket shall be compatible with all SMS Flatscreen Mounts for Plasma Displays.

WH T 2: Extremely low profi le, protruding approximately 1" from wall. Wall mount and tilting mechanism shall be of steel, with anodized aluminum

nish. Unit shall be securely attached to mounting surface using two angles, spaced so that fasteners are 16" apart on center. Tilting mechanism shall feature mating bracket to accept mounting panel of Draper’s keystone-shaped slide on Universal Plasma Bracket or plasma-specific mounting bracket. Unit shall allow 10º tilt, and feature a safety lock to keep plasma display in place. Tilting mechanism shall also lock into place for non-tilting installations. Will accommodate virtually any display up to 330 pounds.

WH 3D: Articulating wall mount collapses to depth of 4" (minus plasma display and bracket). The articulating arm extends the display up to 26" from wall, and allows swivel left and right as far as the wall will allow. Mating bracket to accept mounting panel of Draper’s keystone-shaped slide on Universal Plasma Bracket or plasma-specifi c mounting bracket. Display can be tilted 10°. Will accommodate virtually any display up to 100 lbs.

WH ST: Swiveling wall mount shall be of steel, with anodized aluminum

nish, and shall be attached to mounting surface using steel mounting plate, allowing bracket to swivel approximately ±90º (depending on size of plasma display). Steel tilting mechanism shall feature mating bracket to accept mounting panel of Draper’s keystone-shaped slide on Universal Plasma Bracket or plasma-specifi c mounting bracket. Unit shall allow 15º tilt and 360º rotation, and feature safety screws to keep plasma display in place. Will accommodate virtually any display up to 165 pounds.

WH ST 400: Wall mount shall be extruded aluminum pillar, with anodized aluminum fi nish. Pillar shall be securely attached to mounting surface using two steel mounting plates. Steel tilting mechanism shall feature mating bracket to accept mounting panel of Draper’s keystone-shaped slide on Universal Plasma Bracket or plasma-specific mounting bracket. Display can be mounted horizontally or vertically. Unit shall allow 15º tilt and 20º rotation, and feature safety screws to keep plasma display in place. Will accommodate virtually any display up to 330 lbs.

WH ST 1150: Wall mount shall be extruded aluminum pillar with anodized aluminum fi nish. Pillar shall be securely attached to mounting surface using two steel mounting plates. Steel tilting mechanism shall feature mating bracket to accept mounting panel of Draper’s keystone-shaped slide on Universal Plasma Bracket or plasma-specific mounting bracket. One or two displays can be mounted horizontally or one can be mounted vertically. Unit shall allow 15º tilt and 20º rotation, and feature safety screws to keep plasma display in place. Display can be raised or lowered up to 33½" in 2" increments. Discrete cable track located on sides of support pillar. Will accommodate virtually any display up to 330 lbs.

WFH ST 2000: Wall/Floor mount shall be pillar of extruded aluminum, with anodized aluminum fi nish. Pillar shall be securely attached to wall and fl oor using two steel mounting plates. Steel tilting mechanism shall feature mating

bracket to accept mounting panel of Draper’s keystone-shaped slide on Universal Plasma Bracket or plasma-specifi c mounting bracket. Up to three displays can be mounted horizontally or up to two can be mounted vertically, depending on display sizes. Unit shall allow 15º tilt (except when more than one display is mounted) and 20º rotation, and feature safety screws to keep plasma in place. Discrete cable track shall be located on sides of support pillar. Will accommodate virtually any display up to 660 pounds (total weight of all displays).

Options: Universal Plasma Bracket fi ts plasma displays through 50" diagonal. Shelves for mounting DVD, VCR, videoconferencing camera or other accessories above or below plasma display optionally available with WH ST 1150 & WFH ST 2000. Available in grey or black. Shelves can be raised or lowered in 2" increments. SMS Security Lock Kit allows plasma displays to be secured to SMS Flatscreen Mount for Plasma Displays; kit includes adhesive pad, (2) loopers, 6' cable and key lock. SMS FPD Adapter allows you to use plasma mounts for LCD/TFT flat panel displays.

Exclusive Keystone Mounting Bracket-to-Mount

Exclusive Universal Plasma Display Bracket

FPD Adapter (for mounting Flat

Panel Displays)

www.draperinc.com (765) 987-7999

Image 2
Contents Select Mount See back side for details OptionsSMS Flatscreen Wall Mounts for Plasma Displays by Draper Dimensions WH TWH ST 400, WH ST WFH ST

WHT2, WH 3D, WH ST1150, WH ST, WFH ST 2000 specifications

Draper has made significant strides in the world of 3D printing and projection technologies, with its WH series, which includes the WH 3D, WHT2, WH ST, WH ST1150, and WH ST 400. Each model is tailored to specific user needs, providing advanced features that enhance performance and usability.

The Draper WH 3D is an innovative 3D printer designed for rapid prototyping with precision and efficiency. It boasts a large build volume, making it ideal for both small and large projects. The WH 3D utilizes advanced FDM technology to create complex geometries with a variety of materials, including PLA, ABS, and TPU. Its user-friendly interface, along with Wi-Fi connectivity, allows users to monitor and control print jobs remotely.

The WHT2 is designed for users requiring high-definition video and exceptional image quality. This model integrates cutting-edge projection technology with an innovative three-way mirror system for enhanced brightness and contrast. The WHT2 is particularly suited for large venues, providing a wide throw distance and seamless images even in challenging lighting conditions. Its versatile connectivity options ensure compatibility with various sources, making it a perfect fit for corporate presentations and educational settings.

The WH ST model series focuses on compact yet powerful projection capabilities, ideal for smaller spaces. The WH ST1150 and WH ST 400 models cater to different audience sizes, with the ST1150 offering slightly higher lumens for larger gatherings. Both models feature an ultra-short throw lens that enables large images from very short distances, eliminating shadows and providing a clear viewing experience. These projectors are equipped with built-in speakers and multiple input options, enhancing versatility.

In terms of technology, all WH series products from Draper incorporate user-friendly interfaces, ensuring accessibility for all skill levels. Additionally, they are designed with energy-efficient components, reflecting Draper’s commitment to sustainability. Overall, the Draper WH series exemplifies a blend of advanced technologies and practical design, making them an excellent choice for professionals in diverse fields including education, design, and corporate environments. Whether for 3D printing or high-quality projection, Draper continues to deliver innovative solutions tailored to modern demands.