EdgeStar AP12000HS owner manual Draining the Unit, Direct drainage

Page 12

Notes about the Exhaust hose

Your portable air conditioner is designed to exhaust condensate water that is collected from the air. This water, in either gaseous or droplet form, will be expelled out the exhaust port of the unit. Please take this into account when deciding how to vent it.

1.The exhaust hose supplied with the portable air conditioner can be extended up to 48 inches; however for maximum efficiency, use the shortest length possible.

2.Try to prevent any kinks or bends in the exhaust hose. Kinks or bends may trap exhaust air which can radiate heat into the room or potentially cause the portable air conditioner to overheat and shut itself off.

3.The exhaust hose supplied with the portable air conditioner has been specifically designed for this air conditioner. Do not lengthen the hose by adding additional hoses or attachments or replace it with any other hose.

Do not lengthen the exhaust hose by adding additional hoses or attachments.

Warning: Longer hoses are not recommended.

Draining the Unit

When the portable air conditioner is in cooling mode, dehumidify mode, or heating mode, it will remove moisture from the air. The condensed water from the air will be collected in an internal reservoir and will be evaporated and exhausted out of the exhaust hose. However, in very humid conditions, the internal reservoir may fill completely. This causes the air conditioner to turn off to avoid overflowing the internal reservoir. The WATER indicator will light up on the Control Panel.

Direct drainage

1.Remove the rubber drain plug from the drain port.

2.Connect a drain hose to the drain port.

The portable air conditioner will now drain through the drain hose. Please note that this unit has no drain pump; all water will drain with gravity only, i.e., only “downhill.”

9

Page 11 Page 13
Image 12
Page 11 Page 13
Contents AP12000HS Important Safety Information Electrical SafetyTable of Contents Introduction For Your RecordsParts Identification Front View Control PanelBack View Pre-filter Installing the Carbon Filter Window Kit Installation Instructions Preparations for installing the window kitInstalling the grated adapter Installing the window plates Attaching the duct connectors to the exhaust hose Connecting the duct connector to the unit Connecting the duct connector to the grated adapterDraining the Unit Direct drainageIndicator Control Panel OverviewButton FunctionPower Cooling ModeDehumidifying Mode Heat ModeFan Only Mode Speed TimerLCD Display Water LightUsing the Remote Control Power Button Mode ButtonTimer Button Buttons Function Energy Saving Guide Maintenance Cleaning the unitCleaning the pre-filter Preparation for StorageTroubleshooting Issue Possible Cause SolutionTroubleshooting Issue Possible Cause SolutionSpecifications EdgeStar Limited Warranty One 1 Year Parts & Ninety 90 Days Labor

AP12000HS specifications

The EdgeStar AP12000HS is a highly efficient and versatile portable air conditioner designed to provide optimal comfort in residential and commercial spaces. With a cooling capacity of 12,000 BTUs, this unit is ideal for rooms up to approximately 425 square feet, making it perfect for living rooms, bedrooms, and offices.

One of the main features of the EdgeStar AP12000HS is its dual-hose system. Unlike single-hose models, the dual-hose design allows for better cooling efficiency as it removes warm air from the room while simultaneously drawing in fresh outdoor air. This results in quicker cooling times and less energy consumption, helping users save on their electricity bills.

The unit comes equipped with a programmable thermostat that allows users to set their desired temperature for a more customized climate control experience. User-friendly controls and a digital display make it easy to operate, while a remote control adds convenience for adjusting settings from a distance.

In terms of technology, the EdgeStar AP12000HS features a self-evaporating system that reduces the need for manual drainage. This system works by condensing moisture from the air and draining it through the exhaust hose, resulting in less maintenance and hassle for users. The unit also has an auto-restart function, which is particularly useful during power outages as it remembers the last settings and resumes operation when power is restored.

Another characteristic that sets the EdgeStar AP12000HS apart is its quiet operation. Rated at just 56 dBA, it operates quietly enough to not disrupt daily activities, making it suitable for bedrooms or home offices. The unit also includes a removable and washable air filter, ensuring clean air circulation and improved indoor air quality.

In addition to cooling, the EdgeStar AP12000HS offers a dehumidifying mode, which removes excess moisture from the air, creating a more comfortable environment in humid conditions. With a sleek and modern design, this portable air conditioner seamlessly fits into any decor style.

With its efficient cooling capacity, innovative features, and user-friendly design, the EdgeStar AP12000HS stands out as an ideal choice for individuals seeking a reliable portable air conditioning solution for various settings.
Top Page Image Contents