EdgeStar AP14000W owner manual Using the Control Panel, Power, Cooling Mode, Dehumidifying Mode

Page 14

 

 

Using the Control Panel

Power

Use the Power button to turn the portable air conditioner on and off.

 

 

 

 

By default when you first use the power button, the unit should begin to

 

 

operate in cooling mode. The unit will remember the last used

 

 

mode/settings if you shut down and restart.

 

 

Auto-Restart:If power to the unit is interrupted, the air conditioner will

 

 

restart itself in its last used mode/settings once power is restored. The

 

 

compressor will restart after 3 minutes.

 

 

 

 

Cooling Mode

Cooling mode cools and dehumidifies the air. If the ambient temperature

 

 

drops below the temperature you selected, the compressor turns off and

 

 

the unit functions with the fan only. When the temperature rises above the

 

 

temperature you selected, the compressor turns on again.

 

 

Whether your desired temperature can actually be reached depends on

 

 

the ambient conditions. The room temperature remaining above the set

 

 

temperature is normal.

To operate the unit in cooling mode:

1)Make sure the power cord is plugged into a power outlet.

2)Press the Power button.

NOTE: The exhaust hose

3)

Press the Mode button until the

Cooling indicator is selected.

must be used in Cooling

4)

Select the fan speed by using the Speed button.

mode in order to cool a

You can choose between Low,

Medium and High fan speeds.

room.

 

 

 

5)Set the thermostat by using the Up and Down buttons. The thermostat is adjustable between 61°F - 89°F in one degree increments.

Dehumidifying Mode

During the Dehumidifying mode, the unit will condense water out of the air

and exhaust it through the exhaust hose. . In high humidity conditions,

 

 

you may need to manually drain the unit. The ambient temperature in the

 

room will probably drop by a few degrees while using the Dehumidifying

 

mode.

To operate the unit in dehumidifying mode:

1)Make sure the power cord is plugged into a power outlet.

2)Press the Power button.

3)Press the Mode button until the Dehumidify indicator is selected.

NOTES: If the room temperature is below 77ºF, the fan will always run on low speed while in the Dehumidifying mode. If you do not use the exhaust hose in Dehumidifying mode, you must manually drain the water from the unit. Additionally, the ambient temperature in the room will probably rise by a few degrees if you do not use the exhaust hose. You will be not be able to change the thermostat temperature while in Dehumidifying Mode.

11

Image 14
Contents Portable Air Conditioner Models AP14000HS & AP14000W Important Safety Information Electrical SafetyTable of Contents Introduction For Your RecordsParts Identification Front View Back ViewInstalling the Carbon Filter Window Kit Installation Instructions Preparations for installing the window kitInstalling the grated adapter Installing the window plates Attaching the duct connectors to the exhaust hose Connecting the duct connectors to the unit Connecting the duct connector to the grated adapterPage Control Panel Overview Control Panel LCD IndicatorsIndicator Function FunctionCooling Mode Using the Control PanelPower Dehumidifying ModeSpeed Fan Only ModeTimer Water LightRemote Control Overview Installing the batteriesMode Indicator Function Remote Control LCD IndicatorsIndicators Operating the Remote Control Fan Speed Draining the Unit Direct drainage optionEnergy Saving Guide Cleaning the pre-filter MaintenanceCleaning the unit Preparation for StorageTroubleshooting Issue Possible Cause SolutionTroubleshooting Issue Possible Cause SolutionAP14000W SpecificationsAP14000HS EdgeStar Limited Warranty One 1 Year Parts & Ninety 90 Days Labor

AP14000W specifications

The EdgeStar AP14000W is a powerful and versatile portable air conditioner designed to provide efficient cooling for medium to large-sized rooms. With a cooling capacity of 14,000 BTUs, it is suitable for spaces up to approximately 550 square feet, making it an ideal choice for bedrooms, living rooms, or offices.

One of the prominent features of the AP14000W is its multiple operating modes, which include cooling, heating, dehumidification, and fan-only options. This flexibility allows users to tailor their comfort levels according to the specific needs of any given day. The unit comes equipped with a built-in dehumidifier that can remove up to 80 pints of moisture from the air per day, helping to combat humidity levels during hot and muggy summer months.

The EdgeStar AP14000W also includes user-friendly convenience features, such as a digital display and a remote control that allows users to adjust settings from across the room. An integrated timer functionality enables programmable operation, meaning that users can set the unit to turn on or off at specified times—ideal for those who prefer to come home to a comfortably cool environment.

Another notable characteristic is the self-evaporating technology that minimizes the need for manual drainage. This innovative feature allows the air conditioning unit to reuse the condensed moisture to enhance cooling efficiency, reducing the frequency of maintenance. Additionally, the unit incorporates a washable pre-filter, which helps to capture dust and allergens, ensuring cleaner air output.

With its sleek, modern design, the EdgeStar AP14000W is not only functional but also aesthetically pleasing. The portable design includes caster wheels, enabling easy movement from room to room. Installation is straightforward, thanks to a window kit that accommodates both sliding and hung windows.

In terms of energy efficiency, the EdgeStar AP14000W is equipped with an Energy Efficiency Ratio (EER) of 8.2, making it a cost-effective cooling option. Users can enjoy a comfortable indoor environment without worrying excessively about their energy bills. Overall, the EdgeStar AP14000W stands out as a reliable choice for those seeking an efficient and effective portable air conditioning solution.