EdgeStar AP14000HS manual Operation, Power Button, Indication symbols on LCD, Mode Button

Operation

Air Conditioner Remote Control

All key funtions can be accessed from the remote control.

Note: Adjustments made on the unit’s control panel may not sync with the remote contol’s LED.

Power Button

On/Off

Indication symbols on LCD:

Transmitting

-automatic function		High fan speed
Cooling mode		Med fan speed
Dehumidifying mode
		Low fan speed
Fan only mode
		Water Warning
Heating mode		-the machine will stop running
Temperature Display	ON	OFF Timer Setting Display

Fan Speed Button

Timer Button

Setting the Timer

If the unit is on:

•Press the timer button “ .”

•Use the “ ”and “ ” buttons to set the time (displayed in hours).

•After the selected time elapses, the unit will automatically shut off.

Note: the word “ON” will appear next to

“ ” on the remote LCD when setting the timer.

If the unit is off:

•Press the timer button “ .”

•Use the “ ” and “ ” buttons to set the time (displayed in hours).

•Then select which mode you want the unit to automatically start in and make the necessary adjustments.

•After the selected time elapses, the unit will automatically turn on.

Note: the word “OFF” will appear next to

“ ” on the remote LCD when setting the timer.

F°/C°

Press this button to switch the temperature read-out between Farenheit and Celsius

Note: Can only be toggled in cooling and heating modes.

Mode Button

CoolingDehumidifying Heating

Timer/Temperature SetButtons

Used for adjusting the timer and temperature.

The diplay on the remote control is the set temperature.

When “ ” or “ ” button is pressed in cooling mode, the temperature is adjustable from 61ºF to 89ºF.

When “ ” or “ ” button is pressed in heating mode, the temperature is adjustable from 61ºF to 80ºF.

Timer is adjustable from 1 to 24 hours by pressing either the “” or “ ” buttons.

Note::

- Do not drop the remote control.

- Do not place the remote control in a location exposed to direct sunlight.

- The remote control should be placed

3 feet or more away from any electrical yard

appliances.

Battery replacement: Remove the cover on the back of the remote control and insert the batteries with the (+) and (-) ends pointing in the correct direction.

Use only AAA batteries.

Remove the batteriesif the remote controlwillnotbe used fora month or longer. Do not attempt to recharge the supplied batteries.

All batteries should be replaced at the same time;do not mix old and new batteries. Do not dispose of the batteries in a fire, as they may explode.