Edge Brush Replacement, Stuffing or Blockage

E N G L I S H

Edge Brush Replacement

WARNING: Unplug cord from electrical outlet before servicing.

fig. 25 Turn the power head over. With baseplate facing up, remove the screw located in the center of each edge brush. Remove both edge brushes and replace with new ones. Replace both screws and tighten.

Motor Filter and Oreck Fresh Air®

Scent Cartridge Replacement

WARNING: Unplug cord from electrical outlet before servicing.

The Motor Filter located at the back of the power head should be replaced every 2 months. The Scent Disk should be replaced every month when changing the inner filter bag.

fig. 26 Press two locking tabs on cartridge cover and remove the cover.

fig. 27 Remove the cartridge holder by lifting on tab at top of holder.

fig. 28 Remove old filter or scent disk from holder. Replace filter or scent disk and reinsert holder.

Replace cover by aligning tabs on cover with slots in housing and pressing the cover in place until cover tabs lock.

Using An Oreck Fresh Air® Tab

fig. 29 Your ORECK XL21 vacuum cleaner has a special FRESH AIR® tab pocket. This light-colored pocket is located inside the vinyl bag in the area where the paper disposable bag attaches to the intake tube. Insert tablet in pocket if desired.

Stuffing or Blockage

IMPORTANT: On plush and new carpets, stuffing may occur inside the the intake tube and the lower tube assembly. This is due to excessive fuzz and loose cuttings in the carpet. Stuffing could occur for the first few cleanings until all the loose material is removed. Due to the high efficiency of the cleaner, many older carpets will cause stuffing when the cleaner is first used on them. If your vacuum cleaner does not pick up properly, or makes unusual noise and the outer bag does not fluff up or balloon open, follow these steps:

WARNING: Unplug cord from electrical outlet before servicing.

fig. 30 Check for blockage at the mouth of the intake opening. If there is blockage, remove it with long-nose pliers, a screwdriver or coat hanger. If you can not reach the blockage, remove baseplate. (fig. 21)

fig. 31 If the blockage is not at the base, remove lower tube. Unhook retainer spring, releasing bottom of bag.

fig. 32 Twist lower collar counterclockwise to slide up. Pull tube out of base.

fig. 33 Check for blockage. If blockage is in the tube, remove with a coat hanger.

fig. 34 If tube is not blocked, look into fan housing. Remove debris with long-nose pliers, a screwdriver or coat hanger.

fig. 32 To reassemble, check O-ring on tube, and replace if damaged. Replace tube by first lining up slot at base of tube with tab inside fan housing. Insert tube and push down until the tube is seated. Make sure O-ring is in place against fan housing opening.

Replace and tighten collar until collar locking tabs are locked in place. Reattach bag spring. (fig. 31)

fig. 35 Many times blockage occurs due to a full dust bag causing dirt to

back down the air flow system. When that happens, the blockage will be at the top of the system, starting in the area where the dust bag connects to the connector assembly.

NOTE: If the above actions do not correct the problem, contact an Oreck authorized service center or call the customer service center.

US: 1-800-989-3535 Canada: 1-888-676-7325

600 ECC, XL21 600 ECB specifications

The Oreck 600 ECC, also known as the Oreck Elevate Conquer, is a premium vacuum cleaner designed for those who seek powerful cleaning performance combined with innovative technologies. Its versatility makes it suitable for various floor types, including carpets, hardwood, and tiles.

One of the standout features of the Oreck Elevate Conquer is its lightweight design, weighing in at just around eight pounds. This allows users to maneuver the vacuum with ease, reducing fatigue during extended cleaning sessions. The sleek design doesn't compromise on performance; it comes equipped with a strong motor that provides deep cleaning capabilities, ensuring that dirt and allergens are effectively removed.

The Oreck 600 ECC employs a unique Brush Roll Clean Technology. This feature automatically removes tangled hair and debris from the brush roll with a simple push of a button, making maintenance a breeze. This technology alleviates the frustration of dealing with clogged brushes, allowing users to focus on cleaning rather than on upkeep.

Another notable characteristic is its remarkable filtration system. The vacuum utilizes a multi-layered Filtration system that captures 99% of dust, dirt, and allergens as small as 0.3 microns. This is particularly beneficial for allergy sufferers, as it helps improve indoor air quality significantly.

The Oreck Elevate Conquer also offers a Telescoping Extension Wand that allows users to reach high corners and crevices effortlessly. Additionally, it features a variety of onboard tools, including a dusting brush, upholstery tool, and crevice tool, catering to all cleaning needs, from delicate surfaces to tight spaces.

In terms of power management, the Oreck 600 ECC is designed for convenience with its long power cord, which minimizes interruptions during cleaning. The cord easily retracts, simplifying storage and minimizing entanglement.

Overall, the Oreck 600 ECC, XL21 600 ECB vacuum cleaner combines lightweight design, powerful performance, easy maintenance, and advanced filtration technology. This makes it an appealing choice for anyone looking to maintain a clean home environment while enjoying the ease and convenience of modern cleaning solutions. The thoughtful features and design characteristics of the Oreck Elevate Conquer ensure it provides a robust and user-friendly cleaning experience.