Mitsubishi Electronics 738, 838 manual Setup Oock, Setup Timer

24 4. TV Menus

oSelect either English or Spanish for omscreen menus.

Select the language for a digital program from the ANT input (if available).

Setup O)ock

Set the TV clock to:

*Use the TV Timer to power on the TV automatically at a preset time

*Receive correct updates to ChannelView listings

Note: When the Daylight Savings Time change occurs, you must open this menu and set the TV'sclock ahead or back.

Setup Timer

The Timer tells the TV to power on automatically at a time you set. Use this menu to set a day, time, input, and channel for the Timer. If the TV is already on at the set time, the TV will auto- maticaUy change to the designated channel or input.

The TV clock must be set before you can use the Timer feature.

As a reminder that the TV Timer is set, the TV POWERindicator flashes slowly while the TV is powered off. When the Timer turns on the TV, press any key on the remote control to keep it from turning off after five minutes.

See "Memorizing Channels with Channel Scan" on page 7 to scan for all available channels on the ANT input.

Edit

After channel scan, Edit lets you add and delete memorized channels.

Press PAGEi_/V to jump to the next or previous page of channel numbers.

Press A V _ _ to move through all channel numbers, one at a time.

Adding/Demeting Channems Using the Channem Edit Menu

*Channels marked with a check are in memory.

*To add or delete a channel from memory, highlight the channel number and press ENTER.

To add a single digital channel not in the list, see the full owner's guide at www.mitsubishimtv.com.

Lamp	Standard,	Standard		is for	most viewing	conditions. Use Bright in brightly lit rooms. You may
		notice	increased		fan noise when using the Bright setting.
Blue Glow	On, Off	Select	On	to see blue accent		lighting when the TV is powered on.
(838 series)

Ethemet Connection See "Home Network Setup," page 19.

Wiremess Connection

For assistance ca((1(800} 332-2119