Oreck BB1005 warranty Assembly, To Operate, Maintenance

Page 5
Insert crevice tool, brush and fabric tool into caddy in spaces provided.
Caddy will lift up 90° to allow access to the HEPA filter cover.
Locate caddy clip slots at top rear corners of canister handle. Place appliance on firm, non-slip surface or hold in your lap. Grasp handle firmly. Place one of caddy clip tabs inside slot on one side of handle and stretch the other tab around handle until the opposite tab inserts in slot.

Assembly

IMPORTANT: DO NOT REMOVE the dirt retaining flap attached on the back of the front plate. It must be left in place for the unit to operate properly and to ensure cleaning effectiveness.

Attach Caddy and Insert Tools fig. 1

fig. 2

fig. 3

Attach Shoulder Strap

fig. 4 Clamp one end of shoulder strap in front slot located at front of handle.

fig. 5 Clamp opposite end of shoulder strap in slot at back of handle.

fig. 6 Adjust length by pulling strap through clip.

IMPORTANT: Before using shoulder strap, pull both ends to be sure it is secure.

To Operate

Plug cord into electrical outlet.

Power Switch

fig. 7 Push power switch to “ON” (I) position.

Hose and Tool Installation

fig. 8 The flexible hose uses a Shurlock® locking system that prevents hose removal unless intended. To install hose, align “J” slot in hose coupling with tab inside the suction port. Insert hose into suction port. Twist collar clockwise to lock hose coupling in port. Twist counterclockwise and pull to remove hose.

fig. 9 The adjustable extension wand and cleaning tools supplied with your Oreck XL Compact Canister Vacuum lock together with friction. Twist and push to be sure they lock tightly when installing. Twist and pull to remove.

fig.10 When installing tools directly to blower or suction port without using hose, tool adapter tube must be used.

Adjustable Extension Wand

fig. 11 To adjust extension wand, press release button and pull inner tube to desired length. Tube will lock when button is released. To shorten length, press release button and push inner tube.

For Easy Cord Storage

fig. 12 Wrap cord around the cord wrap and cord dump located on bottom of the canister. To release cord, twist the cord dump.

Blower Port

fig. 13 Remove HEPA Filter cover and filter at back of machine. Firmly insert flexible hose into blower port.

Maintenance

WARNING: Unplug cord from electrical outlet before servicing.

Changing the Filter Bag

fig. 14 Use only genuine ORECK XL filter bags. Stand unit on its back. Twist knob counterclockwise to release and lift out front plate.

fig. 15 Remove used bag and insert fresh bag. The cardboard rim fits smoothly into the recessed top. Align tabs on front plate with slots in housing and replace the front plate. Close unit by turning knob clockwise.

fig. 16 IMPORTANT: The white bag gasket glued in the housing must be in place or unit will not operate properly. Replace if needed.

NOTE: The disposable inner filter bag must be replaced once a month even if it is not full. Change it more often if it is used in extremely dirty areas. Increase the cleaning power of your vacuum by changing the bag often.

Replacing the Micro Filter

Remove filter bag by following the Changing the Filter Bag instructions.

fig. 17 Remove old micro filter from bottom inside unit. Replace with new filter.

NOTE: A replacement filter is supplied in each package of 12 ORECK XL filter bags or you may order filters separately.

Using a HEPA-Filter and Scent Cartridge

fig. 18 Remove HEPA Filter cover at back of machine by pressing down in top slot and folding back the cover. Lift cover to remove.

fig. 19 Insert Fresh Air® Scent Cartridge on tab located in center of the filter cover.

fig. 20 Place the HEPA Filter in the filter cover.

fig. 18 Replace the HEPA Filter assembly on the canister by placing the bottom lip of the cover in the inside slot of the canister and closing the cover until the top latch is locked.

NOTE: It is recommended to replace the scent cartridge when the inner filter bag is replaced.

Replace the HEPA filter every 6 months. Replace more often if vacuum is used to pick up fine particles or in extremely dirty areas.

4

Image 5
Contents BB1005 Page Safeguards Table of ContentsWarranty Parts ListAccessories Sold Separately To Operate AssemblyMaintenance Troubleshooting Guide Maintenance and Customer ServicePage REV B 06/05 ECN# R-8022

BB1005 specifications

The Oreck BB1005 is a versatile and powerful handheld vacuum cleaner that has garnered attention for its compact design and efficient performance. Designed for quick clean-ups, the BB1005 is an ideal solution for tackling everyday messes around the home, car, or office. One of the standout features of this vacuum is its lightweight construction, weighing just about 4 pounds, which allows for easy maneuverability. Users can effortlessly carry the device from room to room or even use it in tight spaces without feeling fatigued.

The vacuum boasts a strong 120-watt motor that provides impressive suction power. This enables the Oreck BB1005 to pick up dirt, dust, pet hair, and debris from various surfaces, making it a handy tool for pet owners or families with young children. Equipped with a HEPA filtration system, the vacuum captures 99.97% of particles as small as 0.3 microns, ensuring a cleaner and healthier environment. This feature is particularly beneficial for allergy sufferers as it helps reduce allergens in the air.

Another key characteristic of the Oreck BB1005 is its user-friendly design. The vacuum features a simple on/off switch, allowing for easy operation without complex controls. The ergonomic handle ensures a comfortable grip during use, which is especially helpful during prolonged cleaning sessions. In addition, the vacuum comes with a variety of attachments, including a crevice tool and dusting brush, providing users with the versatility to clean different surfaces and hard-to-reach areas effectively.

The Oreck BB1005 is also designed for easy maintenance. The dust container is easy to empty, and the filter can be cleaned or replaced as needed, extending the vacuum’s lifespan. With its sleek and modern aesthetic, the BB1005 fits seamlessly into any home decor.

In summary, the Oreck BB1005 handheld vacuum cleaner stands out with its lightweight design, powerful suction, HEPA filtration system, and practical attachments, making it an excellent choice for anyone seeking a reliable, portable cleaning solution. Whether cleaning up crumbs from a kitchen countertop or removing dirt from a car's interior, this vacuum is built to handle a variety of tasks, making it a valuable addition to any cleaning arsenal.