Replacing Edge Brush, Replacing the LED Light

E N G L I S H

SPECIALNORMAL

Replacing Edge Brush

WARNING: Unplug cord from electrical outlet before servicing.

Turn the power head over. With baseplate facing up, remove the screw located in the center of each edge brush. Remove both edge brushes and replace with new ones. Replace both screws and tighten.

Replacing the LED Light

The light assembly should be replaced by an Oreck authorized service center whenever it fails to light during operation.

Using an Oreck Fresh Air® Tab

Your ORECK U7000 vacuum cleaner has a special ORECK FRESH AIR® tab pocket. This pocket is located inside the outer cloth bag in the area where the Odor Fighting filter dust bag attaches to the intake tube. Insert tablet in pocket if desired.

Stuffing or Blockage

IMPORTANT: On plush and new carpets, stuffing may occur inside the the intake tube and the lower tube assembly. This is due to excessive fuzz and loose cuttings in the carpet. Stuffing could occur for the first few cleanings until all the loose material is removed. Due to the high efficiency of the cleaner, many older carpets will cause stuffing when the cleaner is first used on them. If your vacuum cleaner does not pick up properly, or makes unusual noise and the outer bag does not fluff up or balloon open, follow these steps:

WARNING: Unplug cord from electrical outlet before servicing.

21Check for blockage at the mouth of the intake opening. If there is blockage, remove it with long-nose pliers,

a screwdriver or coat hanger. If you can not reach the blockage, remove baseplate. Remove the base plate by removing 5 screws (see “Adjusting or Replacing Brushroll”).

22If the blockage is not at the base, remove lower tube. Unhook bag spring, releasing bottom of bag.

23Twist lower collar counterclockwise to slide up. Pull tube out of base.

24Check for blockage. If blockage is in the tube, remove with a coat hanger.

25If tube is not blocked, look into fan housing. Remove debris with long-nose pliers, a screwdriver or coat hanger.

23To reassemble, check O-ring on tube, and replace if damaged. Replace tube by first lining up slot at base of

tube with tab inside fan housing. Insert tube and push down until the tube is seated. Make sure O-ring is in place against fan housing opening. Replace and tighten collar until collar locking tabs are locked in place. Reattach bag spring.

26Many times blockage occurs due to a full dust bag causing dirt to back down the air flow system. When that

happens, the blockage will be at the top of the system, starting in the area where the dust bag connects to the connector assembly. Note: If the above actions do not correct the problem, contact an Oreck authorized service center or call the

customer service center. US: 1-800-989-3535 Canada: 1-888-676-7325

79011-01REVB specifications

The Oreck 79011-01REVB is a powerful and innovative bagless upright vacuum cleaner that seeks to redefine the way you approach household cleaning. Designed with user convenience and efficiency in mind, this model offers a range of features that make it an essential tool for any home, ensuring that cleaning is not just effective but also effortless.

One of the standout features of the Oreck 79011-01REVB is its lightweight design. Weighing in at a mere 8 pounds, this vacuum allows for easy maneuverability around the home, reducing fatigue during extended cleaning sessions. The ergonomic design, coupled with a comfortable handle, ensures that users can navigate tight spaces and corners without straining their wrists.

Equipped with a powerful 12-amp motor, the Oreck 79011-01REVB efficiently tackles dirt, debris, and pet hair on various surfaces, including carpets, hardwood floors, and tiled surfaces. The versatile brushroll system includes both stiff and soft bristles that adapt to different flooring types, providing superior cleaning performance.

The vacuum features a comprehensive filtration system that employs a HEPA filter, capable of capturing 99.97% of dust, pollen, and other allergens as small as 0.3 microns. This is an invaluable trait for allergy sufferers, making the air cleaner and ensuring a healthier living space.

Another notable aspect of the Oreck 79011-01REVB is its bagless design. This feature not only simplifies emptying the dust canister but also saves users from the hassle and expense of replacing vacuum bags. The easy-release dust canister ensures that maintenance is a breeze, allowing for quick disposal of collected debris.

The vacuum also incorporates advanced technologies, such as the "High-Speed Roller Brush," which operates at a high velocity to agitate and lift dirt and debris effectively. The low-profile design ensures that the vacuum can reach under furniture and tight areas, making it possible to clean spots that would typically be difficult to access.

In summary, the Oreck 79011-01REVB stands out in the crowded vacuum market with its lightweight build, powerful motor, effective filtration system, and bagless convenience. The combination of robust features and advanced technologies makes it a superb choice for homeowners looking for a reliable cleaning solution. Whether it’s pet hair, allergens, or everyday dirt, this vacuum is designed to meet the diverse cleaning needs of modern households.