GSI Outdoors PNEG-214 installation manual Installation of Air Flow Supports

Page 30

13. Air Flow Support Instructions

Installation of Air Flow Supports

1.Determine the spacing and quantity of air flow supports required from the chart on Page 32. Make sure that the correct supports have been ordered for use with the proper depth of plank (either 1-1/8" or 1-3/8" deep).

2.Mark center of bin.

3.Install discharge auger.

4.Mark spacing lines parallel to discharge auger.

5.Start on the side of the bin opposite from the discharge auger and place the first two rows of supports on the spacing lines. Note that air flow supports are installed at an angle in an overlapping pattern so the ends will overlap. See floor layouts in Figure 13B on Page 33.

6.Install the channel lock flooring on the first two rows of supports and secure in place with bin wall flashing.

7.Finish placing supports on the spacing lines and installing floor planks.

a.Single supports are used next to the bin wall and at the ends of split floor planks in order to maintain the floor manufacturer’s recommended minimum distance from the end of a plank to a support.

b.Double supports are used at the sump and along the sides of the discharge auger for spacing of 16" or less and for recirculating bin equipment.

c.Full supports may have to be overlapped or angled to provide support at walls and to maintain spacing and flashing requirements.

30

PNEG-21412'-18 Cor-Lok and Cut-Lok Flooring

Page 29 Page 31
Image 30
Page 29 Page 31
Contents Diameter Bins Cor-Lok and Cut-Lok Flooring Grandstand Layout PNEG-21412-18 Cor-Lok and Cut-Lok Flooring Contents Stiffener Flashing Support Instructions for Internal Safety Guidelines Safety Instructions Follow Safety InstructionsGloves Fan Placement Diagram Grain Systems Recommended Method for Full Floor Installation Recommended Method for Full Floor Installation Gauge Grandstand Identification Grain Systems Formed Flashing Installation Grandstand Layout at Center Well for Recirculating System Cut-Lok/Cor-Lok Plank Order and Grandstand Layouts Bin. First few pieces may have to be trimmed for Cut-Lok/Cor-Lok Plank Order Cor-Lok/Cut-Lok Plank Order and Grandstand Layouts Center well grandstand Cor-Lok/Cut-Lok Plank Order and Grandstand Layouts Cor-Lok/Cut-Lok Plank Order Grandstand Layout for Recirculating System Cut-Lok/Cor-Lok and Grandstand Layouts To exceed 8 inches. layout on To exceed 7 inches Layout on To exceed 7 inches. layout on Cut-Lok/Cor-Lok and Grandstand Layouts Gauge Grandstand Chart 2.66 Corrugation CUT-LOKGauge Grandstand Chart 4.00 Corrugation Flashing Support Stiffeners Installation of Air Flow Supports PNEG-214 12-18 Cor-Lok and Cut-Lok Flooring Air Flow Support Instructions Air Flow Support Instructions 114 142 106 136 172 148 184 134 174 220 126 For Grain Flow Use 24 Spacing Use 20 Spacing PNEG-21412-18 Cor-Lok and Cut-Lok Flooring GSI Group Warranty

PNEG-214 specifications

GSI Outdoors PNEG-214 is a versatile and innovative piece of outdoor cookware designed to enhance the cooking experience for camping and outdoor enthusiasts. This portable cooking system is a game changer for anyone looking to enjoy delicious meals in the great outdoors, thanks to its user-friendly features and advanced technologies.

One of the standout characteristics of the GSI Outdoors PNEG-214 is its compact and lightweight design. Weighing in at just a few pounds, it can easily be packed into a backpack or camping gear without taking up too much space. This makes it an ideal choice for backpackers, hikers, and campers who need to minimize their load while maximizing functionality.

The GSI Outdoors PNEG-214 features a high-quality non-stick cooking surface, which ensures that meals can be prepared without the hassle of food sticking to the cookware. This not only makes cooking more enjoyable but also simplifies the cleaning process. The non-stick surface allows for easy wiping and rinsing, so you can spend more time enjoying your outdoor adventure and less time scrubbing dishes.

Another significant technological advancement featured in the PNEG-214 is its efficient heat distribution. The cookware is designed to provide even heating across its surface, reducing the chances of hot spots that can result in unevenly cooked food. This feature is particularly beneficial when preparing meals that require precise cooking times or delicate ingredients.

Safety is also a priority with the GSI Outdoors PNEG-214. The unit is equipped with heat-resistant handles that remain cool to the touch, allowing users to maneuver the cookware safely even when it's hot. This feature is essential in outdoor cooking situations where open flames may be present.

Additionally, the GSI Outdoors PNEG-214 includes an integrated venting system that allows steam to escape during the cooking process. This helps maintain optimal cooking temperatures, prevents the buildup of excess moisture, and ensures that food retains its intended texture and flavor.

Lastly, the PNEG-214 is designed with durability in mind. Constructed from high-quality materials, it is built to withstand the rigors of outdoor use while maintaining its performance over time. This reliability makes it a favored choice among serious outdoor cooks.

In summary, the GSI Outdoors PNEG-214 is a top-tier cookware solution for outdoor enthusiasts, combining portability, efficiency, and safety features that enhance the cooking experience. Its lightweight design, non-stick surface, even heating, heat-resistant handles, venting system, and durable construction make it an excellent addition to any outdoor camping gear collection. Whether you are embarking on a weekend trip or a longer expedition, the PNEG-214 ensures you can prepare and enjoy meals in the heart of nature.
Top Page Image Contents