Connecting to an External Source

MM-ZJ8(GB) 1/18/04 11:34 Page 8

The auxiliary input can be used to take advantage of the sound quality of your micro component system when listening to other sources.

Examples: A television

A video disc player

A Hi-Fi stereo video cassette recorder

To connect the external source, the source must have an audio output. In addition, you need an RCA connection cable.

1	Set the system to standby mode and disconnect it and the external
	source from the main.
2	Connect the audio cable to the rear of the micro component system.
	Connect the...	To the connector marked...
	Red jack	R (right)
	White jack	L (left)

For optimum sound quality, do not invert the right and left channels.

3	Plug the system back into the main socket and press (	) to
3	Plug the system back into the main socket and press (	) to
	switch it on.
4	Select the AUX source by pressing AUX.
	Result: AUX is displayed.
5	Switch the external source on.

Example: You can watch a film and take advantage of stereo sound provided that the original sound track is in stereo (as if you were in a cinema).

CD Digital Out Jack

This unit can output CD digital sound signals through this jack. Use an optical cable to connect digital audio equipment.

(DAT deck, MD recorder, etc.).

Remove the dust cap (1) from the CD DIGITAL OUT jack.

Then, connect an optical cable plug to the CD DIGITAL OUT jack.

(1)

When the CD DIGITAL OUT jack is not being used.

Attach the supplied dust cap.

(+)

(-)

(+)

(-)