Setting the Shadow
You can set the lyrics to be displayed in the black strips.
Listening to Radio
You can listen to the chosen band (FM, AM broadcast stations) by using either the automatic or manual tuning operation.
1 Load a
2 Press MENU button.
Remote Control Unit
1 Press TUNER/
BAND button.
•The selection toggles back and forth between "FM ➝ AM" each time the TUNER(BAND) button is pressed.
2 Tune in to the desired station.
| Press | button to select |
Automatic Tuning 1 | ||
| the preset | station. |
|
Automatic Tuning 2 | Press and hold | button to |
| automatically search the band. | |
Manual Tuning Briefly press 
button to increase or decrease the frequency incrementally.
Press Cursor 
,
3 button to move to
‘Shadow’.
Press ENTER
4 button to select the desired item.
•Each time the button is pressed, the selection changes as follows:
ON ➝ OFF.
Main Unit
Press the Function
1 button to select the desired band (FM, AM).
2 Select a broadcast station.
Automatic Tuning 1 Press the STOP ( 
) button
to select PRESET and then
press 
button or turn Multi Jog Knob to select the preset station.
Automatic Tuning 2 Press the STOP ( 
) button to
select "AUTO" and then press
and hold 
button or turn
Manual Tuning Press STOP ( 
) to select MANUAL and then briefly
press 
or turn Multi Jog Knob to tune in to a lower or higher frequency.
RADIO OPERATION
Press MONO/ST button to listen in Mono/Stereo.
(This applies only when listening to an FM station.)
59 | • | Each time the button is pressed, the sound switches between "STEREO" and "MONO". | 60 | |
• | In a poor reception area, select MONO for a clear, | |||
|
|