Installation, White to White, Black to Black

INSTALLATION

For under eave installation, the sensor head must be rotated as shown in the next two steps for proper operation and to avoid the risk of elec-

❒After screwing the sensor into the wall plate, connect the junction box wires to the light control wires by twisting together and securing with wire connectors.

trical shock.

For eave mount only:

❒Swing the sensor head towards the clamp

screw.Controls Clamp Screw

White to White

Junction

Box

Red Sensor Wire to

Black Lamp Wire

Lamp

Holders

❒Rotate the sensor head clockwise 180° so the controls face down.

Controls

If the sensor pops out of the ball joint, loosen the clamp screw and push the sensor back into the ball joint. Tighten the clamp screw when done.

These instructions show the sensor wired to flood- lamps.The white sensor wire is neutral.The black sensor wire is hot. The red wire is the switched "hot" wire. The lighting load (500 W, 4.2A max) is placed across the white and red wires.

Wire the Light Control

WARNING: Turn power off at the fuse or circuit breaker.

❒Remove the existing light fixture, if present.

Black to Black

Optional: Connect additional load across the white and red wires. Total lighting load including lampheads on fixture must not exceed 500W (4.2A).

Mount the Light

❒Follow the instructions that came with your light fixture for mounting and adjusting the light fix- ture.

❒Keep regular PAR-38 lamps at least 1" (25 mm) from the sensor. Halogen lamps should be kept at least 2" (51 mm) from the sensor.

- -	595-5544-06

SL-5407 specifications

The Heath Zenith SL-5407 is a state-of-the-art motion sensor floodlight that offers unmatched security and convenience for your home environment. Designed for keen attention to detail, this floodlight boasts a sleek, modern design that seamlessly blends with various architectural styles while providing robust functionality.

One of the standout features of the SL-5407 is its advanced motion detection technology. Equipped with a passive infrared sensor, the floodlight can detect movement from up to 70 feet away, providing vast coverage for driveways, patios, and entryways. The sensor can also be adjusted for sensitivity to minimize false alarms triggered by pets or other small animals, ensuring that the light activates only when necessary.

The SL-5407 features dual adjustable heads, which allow users to direct the light precisely where it is needed. This flexibility enhances the effectiveness of the lighting, illuminating dark areas that could pose safety concerns. The LED lights used in this floodlight are energy-efficient, delivering bright illumination while consuming less power compared to traditional incandescent bulbs.

Another impressive characteristic of the Heath Zenith SL-5407 is its weather-resistant design. Built to withstand the elements, this floodlight features a durable housing that protects against rain, wind, and snow, ensuring long-lasting performance. The light is also easy to install, with a straightforward mounting system that makes it accessible for DIY enthusiasts and professionals alike.

Users can enjoy personalized settings with the built-in adjustable timer, which allows the floodlight to stay on for periods ranging from 1 to 10 minutes after detection. Additionally, the light can be set to turn on automatically at dusk and off at dawn, providing continuous security throughout the night while conserving energy during daylight hours.

Overall, the Heath Zenith SL-5407 motion sensor floodlight is an excellent choice for homeowners seeking to enhance their security system. With its advanced motion detection capabilities, energy-efficient LED technology, adjustable features, and durable construction, it offers peace of mind while maintaining efficiency. Whether you need lighting for a dark driveway, backyard, or front entryway, the SL-5407 stands out as a reliable and stylish solution that meets modern safety requirements.