Heath Zenith 9700LeD warranty Wiring the light control, Mount the Light Control

Page 2

Wiring the light control

WARNING:Turn power off at circuit breaker or fuse.

1.Remove the existing light fixture.

2.Install the mounting strap as shown using two screws that fit your junction box.

3.The plastic hanger can be used to hold the fixture while wiring. The small end of the plastic hanger can be threaded through the hole in the center of the cover plate. The small end then goes into one of the slots on the mounting strap.

4.Route the light control’s wires through the large gasket holes.

5.Twist the junction box wires and fixture wires to- gether as shown. Secure with wire connectors.

 

Black to Black

 

White to White

 

Mounting

 

 

Rubber Plug

Strap

 

 

 

 

 

Mount the Light Control

1.Align the light control cover plate and cover plate gasket. Secure with the mounting bolt.

2.Align the three slots in the decorative shell with the lamp holder pins. Push the shell in and then twist clockwise to lock. Repeat for other shell.

Shell Slot

3.Push the rubber plug firmly into place.

4.If a wet location junction box was not used, caulk the wall plate mounting surface with silicone weather sealant.

To avoid water damage and electrical shock, keep lamp holders 30° below horizontal.

Gasket

Mounting Bolt

Junction box ground wire to green ground screw on fixture.

Lock Nut

Lens

Keep lamps at least 1" (25 mm) from the sensor. Do not allow the lamps to block the lens.

5.Adjust the lamp holders by loosening the lock nuts but do not rotate the lamp holders more than 180° from the factory setting. When screwing in the flood lamps, do not overtighten.

2

598-1360-00

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Requirements FeaturesInstallation UnpackingWiring the light control Mount the Light ControlTESTing and ADJUSTMENTs Bottom of Sensor Avoid aiming the control atMode Switching Summary Manual override ModeSpecifications OperationTroubleshooting Guide Symptom Possible Cause SolutionTWO Year Limited Warranty Desempaque CaracterísticasRequisitos InstalacionAdvertencia Desconecte la energía en el cortacircuito Conecte el Control de LuzInstale el Control de Luz Pruebas Y Ajustes Parte de abajo del detector Evite apuntar el control haciaEspecificaciones OperaciónFase de Sobre control Manual Resumen de las modalidades Del interruptorGuia DE Investigacion DE Averias Síntoma Posible Causa SoluciónGarantía Limitada DE DOS Años Déballage CaractéristiquesExigences Câblage de la Commande ’éclairage Montage de la Commande ’éclairageRé-enclenchez le disjoncteur puis ouvrez l’interrupteur Essais ET RéglagesBas du détecteur Éviter de pointer l’appareil Fonctionnement Mode Contournement ManuelRésumé du mode de commutation Fiche TechniqueGuide DE Dépannage Garantie Limitée DE Deux ANS 598-1360-00 598-1360-00

9700LeD specifications

The Heath Zenith 9700LeD is a cutting-edge outdoor motion sensor light designed to enhance security and visibility around your home. This innovative product combines modern technology with user-friendly features, making it an ideal choice for homeowners who value safety and convenience.

One of the standout features of the Heath Zenith 9700LeD is its advanced motion sensing capability. Equipped with a state-of-the-art PIR (Passive Infrared) sensor, this unit can detect movement from up to 30 feet away, ensuring that it activates when someone approaches your property. The adjustable sensitivity settings allow users to customize the responsiveness of the sensor, minimizing false alarms from passing vehicles or animals.

In addition to its impressive detection capabilities, the Heath Zenith 9700LeD offers a powerful LED lighting system. Unlike traditional incandescent bulbs, LEDs provide bright illumination while consuming significantly less energy. With a lifespan of approximately 50,000 hours, users can enjoy long-lasting performance and lower energy bills, making this product not only eco-friendly but also cost-effective.

The design of the Heath Zenith 9700LeD also deserves mention. It has a sleek and modern aesthetic that complements various home exteriors, from contemporary to traditional styles. The durable construction ensures that it can withstand harsh weather conditions, while the adjustable light heads allow for customized lighting angles to optimize coverage.

Another key feature of the Heath Zenith 9700LeD is its versatile operation modes. Users can select from multiple modes, including the motion-activated mode, which turns the light on when movement is detected, or the dusk-to-dawn mode, keeping it illuminated throughout the night for continuous safety. The built-in photocell ensures that the light activates based on ambient light levels, providing convenience and reliability.

Installation is straightforward, thanks to the included mounting hardware and clear instructions. The unit can be easily mounted on walls or eaves, and it is compatible with various mounting surfaces, ensuring a secure and stable placement.

Overall, the Heath Zenith 9700LeD is a reliable and efficient outdoor lighting solution that combines advanced sensing technology with energy-efficient LED illumination. Its features, durability, and versatility make it a top choice for anyone looking to enhance their property's security while enjoying the benefits of modern lighting technology.
Top Page Image Contents