Samsung HT-TX25R/NWT manual Setting the Test Tone, Setting the Audio

Settings (Con’t)

Setting the Test Tone

Use the Test Tone feature to check the speaker connections.

1 In Stop mode, press the MENU button.

2 Press the Cursor ▼ button to move to <Audio> and then press the ENTER button. 3 Press the Cursor ▼ button to move to <TEST TONE> and then press the

ENTER button.

 The test tone will be sent to L C R SR SL SW in order.

If the ENTER button is pressed again at this time, the test tone will stop.

dPress the RETURN button to return to the previous level. d Press the MENU button to exit the setup screen.

GB

Setting the Audio

You can adjust the balance and level for each speaker.

1 In Stop mode, press the MENU button.

2 Press the Cursor ▼ button to move to <Audio> and then press the ENTER button.

3 Press the Cursor ▼ button to move to <SOUND EDIT> and then press the ENTER button.

4 Press the Cursor ▲,▼ button to select and adjust the desired item. Press the Cursor ◄,► button to adjust the settings.

d Press the RETURN button to return to the previous level.

dPress the MENU button to exit the setup screen.

Manually Adjusting the Speaker Volume and Balance with the SOUND EDIT Button.

Press the SOUND EDIT button and then press the Cursor ◄,► button.

SETUP

Adjusting Front/Rear Speaker Balance

•You can select between 00 and –06 and OFF.

•The volume decreases as you move closer to –6.

Adjusting Center/Rear/Subwoofer Speaker Level

•The volume level can be adjusted in steps from +6dB to –6dB.

•The sound gets louder as you move closer to +6dB and quieter as you get closer to -6dB.

48 49