Specifications, Completing Installation, M E

3.For test purposes, use a small, phillips screw- driver to turn the TIME control to the TEST (5 second) position (see Figure 4). Turn the power back on at the circuit breaker.

4.Verify the switch has power. The bottom LED will be lit.

5.Allow the sensor to stabilize (about 1 minute). The sensor is ready to detect motion.

6.Push the ON/OFF button. The lights and mo- tion sensor will turn on. The lights will remain on as long as the sensor detects motion or the ON/OFF button is pushed again. The lights will turn off 5 seconds after motion stops.

1 10

Test 25 15

T I M E

Figure 4 - Control Panel

COMPLETING INSTALLATION

1.Replace control panel cover and attach the decorative wall plate. In installations where the Heath®/Zenith motion sensor switch is combined with other switches or outlets on an expanded box, you will need to purchase a combination wall plate. Various combination wall plates are available at home centers and electrical supply stores.

2.PushtheON/OFFbutton.Verifytheswitchturns on the lights and the top LED is on.

3.Push the ON/OFF button again and verify the lights turn off and the top LED is off.

4.Push the ON/OFF button again to turn lights and sensor on. Leave the room or stay completely still for the amount of time you selected for the lights to stay on. Verify the lights turn off at the desired time.

Note: The motion sensor requires a 2 second delay when switching off and on using the ON/OFF button.

ADJUSTMENTS

Time

There are 6 preset selections for the amount of time the lights stay on: Test (5 seconds), 1, 5, 10, 15, and 25 minutes. Use a small, phillips screw driver to adjust the TIME control (see Figure 4). Turn the TIME control until it “snaps” into the desired time position.

	SPECIFICATIONS
Electrical Input	120V, 60 Hz.
Fluorescent* Load	30 Watts minimum, Up to 400 Watts Maximum
Motor Load	Up to 1/8 HP Maximum
Incandescent	Up to 500 Watts Maximum at 120VAC
On-Time	Selectable, approximately 5 seconds to 25 minutes
Coverage	up to 15 ft. (4.6 m) at 180°, up to 30 ft. (9.1 m) in front of the sensor

*Designed for use with standard 3 ft./30 watt and 4 ft./40 watt rapid-start ﬂuorescent tubes.

598-1232-01

6106 specifications

Heath Zenith 6106 is an advanced motion-activated outdoor light fixture that combines functionality with superior design to elevate both safety and aesthetics in outdoor environments. This unique product is specifically engineered to provide comprehensive illumination while ensuring that energy efficiency remains a priority.

One of the standout features of the Heath Zenith 6106 is its state-of-the-art motion sensor technology, which activates the light upon detecting movement up to 30 feet away. This impressive range makes it an ideal choice for patios, walkways, and driveways, enhancing security by illuminating dark areas when needed. Additionally, the motion sensor boasts adjustable sensitivity settings, allowing users to customize it according to their specific outdoor conditions.

The Heath Zenith 6106 is equipped with a photocell sensor that ensures the light only activates during low-light conditions, thereby conserving energy during daylight hours. This dual-sensor feature—combining motion detection with ambient light sensing—ensures optimal efficiency, prolonging the lifespan of the bulbs and reducing electricity costs.

Another significant characteristic of this fixture is its durable construction. Made from high-quality materials, the Heath Zenith 6106 is weather-resistant, providing reliable performance in various climate conditions. Its modern design blends seamlessly with any outdoor decor, making it a versatile choice for homeowners looking to enhance their outdoor spaces.

The unit uses LED technology, known for its longevity and minimal energy consumption. By utilizing LED bulbs, the Heath Zenith 6106 requires less frequent replacements compared to traditional incandescent lights, further enhancing its appeal as a low-maintenance solution for outdoor lighting.

Installation of the Heath Zenith 6106 is straightforward, designed for easy mounting on walls and various surfaces. Included in the package are all needed hardware components, making the setup process swift and hassle-free.

In conclusion, the Heath Zenith 6106 provides a blend of modern technology and practical features, making it a superior choice for anyone seeking to enhance their outdoor lighting. With its motion detection capabilities, energy-efficient design, and robust construction, this fixture promises to deliver safety, convenience, and style for years to come.