Samsung HT-TQ25R/XFO, HT-TQ22R/XFU manual Setting the Test Tone, Stop or no, Press Test Tone button

Setting the Test Tone

Use the Test Tone feature to check the speaker connections.

	In Stop or no			Press Cursor			Press Cursor	button
	disc mode,			button to move to			to move to ‘TEST
1 press MENU			2	‘Audio’ and then		3	TONE’ and then press
				press ENTER button.			ENTER button.
	button.
						• The test tone will be sent to L ➝ C ➝
						R ➝ SR ➝ SL ➝ SW in order.
						If the ENTER button is pressed again
						at this time, the test tone will stop.
	MOVE ENTER	EXIT		MOVE ENTER	EXIT
							MOVE ENTER RETURN	EXIT

Press RETURN button to return to the previous level.

Press MENU button to exit the setup screen.

Alternate method: press the TEST TONE button on the remote.

Press TEST TONE button. L: Front Speaker (L) C: Center Speaker

STOPEXIT

SW: Subwoofer

R: Front Speaker (R) SL: Rear Speaker (L) SR: Rear Speaker (R)

• Test tone will be produced as follows:

When playing a DVD or CD, this will work only in Stop mode.

• Use this function to check that each speaker is correctly connected and that there is no problem.

Multi-Channel Pro Logic Mode

To end the test tone,

press TEST TONE button again.

Start

53