Samsung HT-X20R/NWT manual Listening to Radio, Presetting Stations, Remote Control, Main Unit

Listening to Radio

Remote Control

1 Press the TUNER button to select the FM band. 2 Tune in to the desired station.

 Automatic Tuning 1 : When the #,$ button is pressed, a preset broadcast station is selected.

 Automatic Tuning 2 : Press the and hold .,, button to automatically search for active broadcasting stations.

Manual Tuning : Briefly press the .,, button to increase or decrease the frequency incrementally.

Main Unit

1 Press the FUNCTION button to select the FM band. 2 Select a broadcast station.

 Automatic Tuning 1 : Press the STOP () button to select PRESET and then press the #,$ button to select the preset station.

Automatic Tuning 2 : Press the STOP () button to select <MANUAL> and then press the and hold #,$ button to automatically search the band.

Manual Tuning : Press the STOP () button to select <MANUAL> and

then briefly press the #,$ button to tune in to a lower or higher frequency.

d Press the MO/ST button to listen in Mono/Stereo. (This applies only when listening to an FM station.)

 Each time the button is pressed, the sound switches between <STEREO> and <MONO>.

 In a poor reception area, select <MONO> for a clear, interference-free broad- cast.

GB

Presetting Stations

Example : Presetting FM 89.10 in the memory

1 Press the TUNER button to select the FM band. 2 Press the .,, button to select <89.10>.

3 Press the TUNER MEMORY button.

 <PRGM> flashes in the display.

4 Press the #,$ button to select preset number.

 You can select between 1 and 15 presets.

5 Press the TUNER MEMORY button again.

Press the TUNER MEMORY button before <PRGM> disappears from the display.

 <PRGM> disappears from the display and the station is stored in memory.

6 To preset another station, repeat steps 2 to 5.

d To tune in to a preset station, press the #,$ button on the remote control to select a channel.

• This unit does not receive AM broadcasts.

MISCELLANEOUS

54 55