Samsung VCC6790H3R/XSB, VCC6780V31/XSB manual Troubleshooting, Problem Remedy

troubleshooting

- IF YOU HAVE A PROBLEM

PROBLEM	REMEDY
Motor does not start.	Check cable, plug and socket.
	Leave to cool.
Suction force is gradually	Check for blockage and remove.
decreasing.
Cord does not rewind fully.	Pull the cord out 2-3m and push down the cord rewind
	button.
Vacuum cleaner does not pick	Check hose and replace if required.
up dirt.
	Please check filter and, if required, clean as illustrated
Low or decreasing suction.	in the instructions. if filters are out of condition change
	them to new ones.
Body overheating.	Please check filters, If required clean as illustrated in the
	instruction.
Static electicity discharge.	Please decrease power suction.

This Vacuum cleaner is approved the following.

EMC Directive : 2004/108/EEC

Low Voltage Directive : 2006/95/EC

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.

country	customer care center	web site
lithuania	8-800-77777	www.samsung.com/lt
latvia	8000-7267	www.samsung.com/lv
estonia	800-7267	www.samsung.com/ee

16_ troubleshooting