Preparing for Operation in WA- TER Mode

PREPARING FOR OPERATION IN WA- TER MODE

Once the appliance has been installed, it is ready for use.

However, its efficiency can be enhanced by ope- rating it in De’Longhi’s patented water mode. The water in the tank increases the cooling po- wer of your Pinguino and at the same time redu- ces noise levels and electrical consumption. Compared to air, water reduces the temperature of the cooling circuit much more efficiently, be- fore being given off from the air exhaust hose in the form of vapour.

Remember that:

•You must always use salt-free clean water, tap water is recommended.

•The length of time the water in the tank lasts depends greatly on environmental conditions such as temperature, humidity, insulation, the sun exposure of the room, the number of people present, etc. As an estimate, the water lasts about six hours.

The BOOST function (see page 13) shortens the operating time to about 4 hours, but the cooling power and efficiency are increased.

•When the water in the tank runs out, the

light comes on and operation of the appliance switches automatically to air-air.

The appliance is fitted with a resin lime- scale filter enabling normal tap water to be used.

The resins reduce water hardness and therefo- re prolong the working life of the appliance.

“CF” is displayed when the limescale fil- ter needs replacing. The efficacy of the filter depends on water hardness. It should, howe- ver, be replaced every five years.

Setting water hardness

Measure water hardness using the indicator pa- per provided.

•Remove the indicator paper from its pack

(R).

•Immerse the paper completely in a glass of water for one second.

•Remove the paper from the water and sha-

ke lightly. After about a minute, 1, 2, 3, 4 or 5 red squares appear, depending on the hardness of the water. The appliance can be set to three different water hardness levels soft (H1), medium (H2) and hard (H3). De- termine the hardness of the water you will be using by comparing the red squares on the indicator paper with the table below.

Water hardness indicator		Level
19	Soft	H1
		H1
20	Medium
		H2
	Hard	H3
		H3

To set water hardness, proceed as follows:

1.Set the appliance to stand-by.

2.Hold the FAN button on the control panel down for 10 seconds. The appliance emits a beep and H1, H2 or H3 is displayed.

3.Use the + or - buttons to set the hardness level according to the table below. Wait a few seconds for the setting to be memorized. The appliance emits another beep and goes back to stand-by.

The machine is set by default for medium hardness (H2).

Filling the tank

The water tank is located at the bottom of the ap- pliance. Push in on the Tank Door (J) above the word PULL, and pull the tank out as far as it will go (fig. 13). Remove the cap and use a container (bottle, jug, watering can) to pour in the water (fig. 14/15). You can see when the tank is full through the filling hole. It holds a maximum of 21 pints (10 liters).

PAC WE 110 specifications

The DeLonghi PAC WE 110 is a standout portable air conditioning unit designed to provide effective cooling for small to medium-sized rooms. This versatile model combines innovative technology with user-friendly features, making it a popular choice for those seeking a reliable climate control solution.

One of the main features of the PAC WE 110 is its dual functionality, as it not only cools but also dehumidifies. This is particularly beneficial in humid climates, where excess moisture can make indoor environments uncomfortable. The unit can effectively reduce humidity levels while maintaining a comfortable temperature, ensuring a pleasant living space year-round.

The cooling capacity of the PAC WE 110 is rated at 11,000 BTUs, making it powerful enough to cool spaces up to approximately 100 square meters. Whether you're using it in a living room, bedroom, or office, this portable air conditioner helps maintain a consistent and comfortable atmosphere, allowing you to enjoy your environment without the sweltering heat.

Equipped with an Eco-friendly refrigerant, the PAC WE 110 is designed with environmental considerations in mind. This refrigerant not only supports effective cooling performance but also ensures that the device operates with minimal impact on the ozone layer, making it a sustainable choice for eco-conscious consumers.

The unit is fitted with an LCD control panel and a remote control, providing exceptional ease of use. Users can easily set their desired temperature, fan speed, and operating mode from across the room. Additionally, the PAC WE 110 features a programmable timer, allowing you to schedule when the unit turns on and off, further enhancing energy efficiency.

Another significant characteristic of the PAC WE 110 is its portability. The built-in wheels make it easy to move from one room to another, a feature that many consumers appreciate, especially in apartments or homes where airflow varies from one area to another. With a simple installation process, users can set up the unit in minutes, requiring only a window for exhaust.

Moreover, the PAC WE 110 boasts a self-evaporating system that collects and recycles condensation, reducing the need for manual drainage. This feature not only enhances convenience but also minimizes maintenance, allowing users to enjoy consistent performance without frequent interruptions.

Overall, the DeLonghi PAC WE 110 portable air conditioning unit serves as a powerful and efficient solution for effective cooling and dehumidification, combining ease of use with advanced technology and eco-friendliness. With its thoughtful design and performance capabilities, it stands out as a great addition to any home or office environment.