Samsung GE87K-S/BAL Installing Your Microwave Oven Setting the Time, To display the time, Button

Installing Your Microwave Oven Setting the Time

Place the oven on a flat level surface 85cm above the floor. The surface should be strong enough to safety bear the weight of the oven.

20cm	10cm	1.	When you install your oven, make sure there is adequate
above	behind		ventilation for your oven by leaving at least 10 cm (4
			inches) of space behind and, on the sides of the oven
85cm of	10cm		and 20 cm (8 inches) of space above.
the floor	on the side

2. Remove all packing materials inside the oven. Install the roller ring and turntable.

Check that the turntable rotates freely.

3.This microwave oven has to be positioned so that plug is accessible.

If the supply cord is damaged, it must be replaced by a special cord or assembly available from the manufacturer or its service agent.

For your personal safety, plug the cable into a 3-pin, 230 Volt, 50Hz, AC earthed socket. If the power cable of this appliance is damaged, it must be replaced by a special cable.

Do not install the microwave oven in hot or damp surroundings like next to a traditional oven or radiator. The power supply specifications of the oven must be respected and any extension cable used must be of the same standard as the power cable supplied with the oven. Wipe the interior and the door seal with a damp cloth before using your microwave oven for the first time.

Your microwave oven has an inbuilt clock. The time can be displayed	EN
in either the 24-hour or 12-hour notation. You must set the clock:

•When you first install your microwave oven

•After a power failure

Do not forget to reset the clock when you switch to and from summer and winter time.

1. To display the time	Then press the
in the...		button...
24-hour notation	Once
12-hour notation	Twice

2.Turn the dial knob to set hour.

3.Press the button.

4.Turn the dial knob to set minute.

5.Press the button.

5