Washing a Load of Laundry
Washing for the first time
Before washing clothes for the first time, you must run a complete cycle without clothes. To do this:
1.Press the 
(On/Off) button.
2.Pour a little detergent into compartment 
in the detergent drawer.
3. Turn on the water supply to the washing machine.
4. Press the Temperature button repeatedly until
40 ˚C is displayed.
5.Press the Start/Pause button.
•This will remove any water from the manufacturer’s test run remaining in the machine.
Dispender 
:Detergent for prewash or starch.
Dispenser 
: Detergent for main wash, water
Dispenser 
: Additives,e.g.fabric softener or former (fill no higher than lower edge of insert “ A”)
Putting detergent in the washing machine
1. | Pull out the detergent drawer. |
2. | Add laundry detergent into compartment . |
3.Add softener into compartment 
(if you desire).
4. Add prewash detergent into compartment 
(if you desire).
Caution : Concentrated or thick fabric softener and conditioner must be diluted with a little water before being poured into the dispenser (prevents the overflow from becoming blocked.)
8 SAMSUNG Washing Machine Owner’s Instructions