Wall Mounting, Access to the controls | Creda TPR2-1250W, TPR2-750W

Wall Mounting

IMPORTANT -The wall brackets supplied with the appliance must be used. The heater should be positioned observing the minimum clearances stated around the heater - see

Fig.1.

DO NOT locate the heater immediately below a fixed socket outlet or connection box.

1.Remove wall mounting bracket from the back of the heater by depressing the spring latch at the top of each bracket - see Fig. 2.

2.Fix the wall bracket securely to the wall through the four screw holes provided.

3.Present the heater to the wall bracket, and engage lower slots in the back with bracket.

4.Raise the heater to its upright position and push the heater onto the bracket to engage the top latch.

Fig. 2

Access to the controls

The controls cover on your heater has a latch which may be locked shut if desired using a small bladed screwdriver

-see Fig. 3.

To open the cover insert the blade of the screwdriver in the small slot and rotate a quarter of a turn clockwise to disengage the latch. The cover may then be hinged back towards the wall for access to the controls.

Fig. 3

Operation - W models - Thermostat only

Control of Output and Temperature (see Fig. 4)

The isolating switch in the fixed wiring should be used to switch the product ON and OFF. When ON the product will be controlled by the thermostat.

Fig. 4

Thermostat Operation

The heater is fitted with an adjustable thermostat enabling the room temperature to be controlled by adjusting the setting accordingly. The * setting represents a room temperature of approximately 5°C and may be used for protection against frost. Higher temperature settings range from 1 to 6 (max.) creating a maximum room temperature of approximately 30°C.

Switch on the heater and turn the thermostat knob to the position corresponding to the required temperature for the room. The heater will then maintain the room temperature at the chosen level, provided that the correct size of heater has been selected for the room to be heated.

NOTE - Should your heater fail to come on when the thermostat knob is at a low setting, this may be due to the room temperature being higher than the thermostat setting.

Operation - TW Models - Thermostat and Timer

Control of Output and Temperature (see Fig. 5)

The slide switch on the timer unit controls the electricity supply to the heating elements on TW models.

Fig.5

Thermostat Operation

- see above.

Using the Timer

The heater must be connected to the electricity supply for the timer to operate. Set the timer by rotating the dial clockwise until the correct time of day is indicated opposite the datum mark (located at centre front of the timer - see Fig. 5).

'OFF’ Position

Set the timer switch to position. The timer operates but the heater will not output any heat, as the electricity supply to the heating elements has been disconnected.

Manual Operation

Set the timer switch to ,position. The heater will now

operate continuously under the control of the thermostat - see 'Thermostat Operation' above.

TPR2-1000W, TPR2-2000W, TPR2-1250W, TPR2-750W, TPR2-1500W specifications

The Creda TPR2 series of electric heaters, including models TPR2-1500W, TPR2-2000W, TPR2-1250W, TPR2-750W, and TPR2-1000W, epitomizes modern heating technology designed to provide efficient, reliable, and user-friendly temperature regulation for residential and commercial spaces.

One of the standout features across the TPR2 range is the unique precision temperature control. This technology ensures that the heaters maintain a consistent and comfortable temperature while consuming minimal energy. Users can easily adjust the temperature settings according to their preferences using the intuitive digital display. The heaters also feature multiple heating settings, enabling users to choose the intensity of heat based on their immediate needs.

Energy efficiency is a hallmark of the Creda TPR2 models. Each model is designed to deliver rapid warm-up times, ensuring that spaces reach desired temperatures swiftly without excessive energy consumption. The heaters utilize advanced thermal technology and insulation materials, enhancing their performance and reducing heat loss. Consequently, they are suitable for use in various settings, from cozy homes to larger office environments.

Another key characteristic is the space-saving design. The sleek and compact form of the TPR2 heaters allows for strategic placement in any room, making them a practical choice even in smaller spaces. Additionally, the wall-mountable option provides further versatility in installation, freeing up valuable floor space while maintaining aesthetic appeal.

Safety features are paramount in the design of the TPR2 models. Each unit includes overheat protection and tip-over safety switches, ensuring that the heaters operate safely under all circumstances. The cool-touch exterior also adds a layer of safety, preventing accidental burns during operation.

With models ranging from 750W to 2000W, the TPR2 series can cater to various heating requirements. Whether you need a smaller heater for a personal space or a more robust unit for larger areas, Creda offers suitable options. Each heater is designed to deliver durable performance, ensuring they are a long-term investment for comfort and warmth.

In summary, the Creda TPR2 series offers a combination of advanced technology, energy efficiency, space-saving design, and essential safety features. This makes them a reliable choice for anyone seeking effective heating solutions without compromising on safety or style.