Trouble Shooting

Fire Will Not Burn.

Check that:

a)the air inlet is not obstructed in any way,

b)chimneys and flueways are clear,

c)a suitable fuel is being used,

d)there is an adequate air supply into the room,

e)an extractor fan is not fitted in the same room as the fire.

Fire Blazing Out Of Control.

Check that:

a)the doors are tightly closed,

b)the thermostat knob is turned down to the minimum setting,

c)the air inlet damper is closed (at the bottom left of the appliance), and that it is not prevented from closing completely by a piece of ash,

d)a suitable fuel is being used,

e)the door seals are in good condition.

Over-Firing

If the fire is over-fired it will cause premature failure of the internal fire parts. Overfiring is occurring when any internal parts of the fire begin to glow red. To prevent over-firing ensure that:

a)the door seals are kept in good condition, and that the doors are sealing correctly,

b)the thermostat on the fire is working correctly,

c)a suitable fuel is being used,

d)the fire is not fitted onto a heating system which is too large.

Fume Emission.

Warning Note: Properly installed and operated this appliance will not emit fumes. Occasional fume from de-ashing and re-fuelling may occur. Persistant fume emision is potentially dangerous and must not be tolerated. If fume emission does persist then the following immediate actions should be taken:

A)Open doors and windows to ventilate the room.

B)Let the fire out and safely dispose of fuel from the appliance.

C)Check for flue or chimney blockage, and clean if required.

D)Do not attempt to relight fire until cause of fume has been identified, if necessary seek professional advice.

The most common cause of fume emission is flueway or chimney blockage. For your own safety these must be kept clean.

Freezing

Do not light the fire if there is any possibility that any parts of the system may be frozen.

Chimney Fires.

If the chimney is thoroughly and regularly swept, chimney fires should not occur. However, if a chimney fire does occur turn the control knob to the minimum setting, and tightly close the doors of the appliance. This should cause the chimney fire to go out in which case the control should be kept at the minimum setting until the fire in the appliance has gone out. The chimney and flueways should

Page 6

then be cleaned. If the chimney fire does not go out when the above action is taken then the fire brigade should be called immediately.

After a chimney fire the chimney should be carefully examined for any damage. Expert advice should be sought if necessary.

Lack of Heat To

Radiators / Hot Water

Check that:

a)the fire is burning properly - if not then carry out the checks under "Fire Will Not Burn".

b)the throat plate is fitted correctly (see Fig. 4.) and that it is not distorted.

c)the door seals are in good condition.

d)If the hot water goes cold when the pump is turned on, or if some radiators are hotter than others, then the system may need balancing, the pump may be pumping the water too quickly around the system, or the radiators may need bleeding. Please ask your installer to check these points.

e)Ensure that the boiler reduction brick has not been fitted when it is not required.

LA30iB 3.99

LA30iB specifications

The Charnwood LA30iB is an innovative and aesthetically pleasing wood-burning stove designed for modern living spaces. Characterized by its contemporary design, this stove combines functionality with an elegant presence, making it a popular choice among homeowners looking to enhance their interiors while enjoying the warmth of a wood fire.

One of the most remarkable features of the LA30iB is its impressive efficiency. The stove is designed with advanced combustion technology that ensures optimal burning of wood fuel. This efficiency not only reduces fuel consumption but also minimizes harmful emissions, making it an eco-friendly option for heating your home. With a nominal heat output of around 8 kW, it is ideal for medium to large rooms, providing consistent warmth during the colder months.

The LA30iB boasts a clean-burning system that utilizes a triple-burn combustion process. This technology ensures that the fire consumes most of the gases produced during combustion, resulting in a cleaner burn and a more efficient use of fuel. As a result, users can enjoy longer burn times and reduced ash production, contributing to easier maintenance and a more pleasant user experience.

In terms of construction, the LA30iB features a robust cast-iron body that provides exceptional durability and heat retention. This material not only enhances the aesthetic appeal of the stove but also helps in distributing heat evenly throughout the room. The stove is equipped with large glass doors that allow for a stunning view of the flames, creating a cozy ambiance while ensuring that heat is directed into the living space.

Moreover, the Charnwood LA30iB includes an integrated air-wash system, which helps keep the glass doors clean and free from soot build-up. This feature ensures that users can enjoy an unobstructed view of the fire without the hassle of frequent cleaning, adding convenience to their experience.

The stove is available in a variety of finishes, allowing homeowners to select a model that complements their décor. Its sleek lines and modern touch make it a versatile addition to both contemporary and traditional interiors. Overall, the Charnwood LA30iB stands out as a highly efficient, eco-friendly, and visually appealing wood-burning stove, perfect for enhancing any home environment.