Samsung MAXZL45RH/ELS manual Setting the Clock, Viewing the Various Functions on, Your System

Viewing the Various Functions on	Setting the Clock
Your System

GB

You can view the various functions available on your system.

1 Press the Demo button.

Result: The various functions available are listed in turn on the dis- play.

All these functions are described in detail in this booklet. For instructions on how to use them, refer to the appropriate sections.

2 To cancel this function, press Demo again.

Your system is equipped with a clock which allows you to turn your system on and off automatically. You should set the clock:

When you purchase the mini-compact system

After a power failure

After unplugging the unit

Remember to reset the time when the clock changes from winter to summer time and vice verse.

For each step, you have a few seconds to set the required options. If you exceed this time, you must start again.

1

2

3

4

5

6

7

Switch the system on by pressing On/Standby.

Press Timer/Clock twice.

Result: CLOCK is displayed.

Press Enter.

Result: The hour flashes.

To...	Turn the Multi Jog knob to the...
Increase the hours	Right
Decrease the hours	Left
When the correct hour is displayed, press Enter.
Result: The minutes flash.
To...	Turn the Multi Jog knob to the...
Increase the minutes	Right
Decrease the minutes	Left

When the correct time is displayed, press Enter.

Result: The clock starts and is displayed, even when the system is in standby mode.

You can display the time, even when you are using another function, by pressing Timer/Clock once.

You can also use Program/Set button on the remote control to instead Enter button in step 3, 5, 7.

You can also use / buttons to instead Multi Jog knob in step 4, 6.

1	4,6	4,6
		3,5,7
		4,6
	2

10