Samsung RS53K4600SA/EF To connect the water filtering hose to the water line, Filtering hose

To connect the water filtering hose to the water line

a

A

a

B

Remove cap

a

03

1.	Loosen and remove the compression
	nut (a) from the water line of the
	refrigerator, and insert it to the water
	filtering hose.
2.	Tighten up the compression nut (a) to
	connect the water filtering hose and the
	water line.
3.	Open the main water valve and check
	for any leaks.
4.	If there are no leaks, dispense about a
	3 liters of water before actually using
	the refrigerator to remove impurities

A.Water Line from unit

B.Water Line from Kit

inside the water filtering system.

Installation

To repair the water line

CAUTION

•The warranty for your refrigerator does not cover the water line installation. The water line installation will be performed at your own costs unless the installation fee is included in the retailer’s price.

•Samsung takes no responsibility for the water line installation. If water leaks occur, contact the installer of the water line.

•The waterline must be repaired by a qualified professional. If you encounter a water leak, contact a local Samsung service centre or the installer of the waterline.

English  33 

Untitled-22 33

2016-03-17 ￿￿ 5:50:08