Chromalox PG442 specifications Wiring, Maintenance, Model Volts Watts Optional Grill Kit

Page 3

IMPORTANT INSTRUCTIONS

When using electrical appliances, basic precautions should always be followed to reduce risk of fire, electric shock and injury to persons, including the following:

1.Read all instructions before using this heater.

2.This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. Keep combustible materials, such as furniture and papers at least 7 feet from the front of the heater.

3.Always disconnect heater when not in use.

4.Do not use outdoors.

5.Connect to properly grounded outlets or building ground.

6.This heater has hot surfaces. Do not use it in areas where gaso- line, paint or flammable liquids are used or stored.

7.Use this heater only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock or injury to persons.

8.In order to prevent equipment damage, protect with a ground

fault device such as Chromalox STAR-GF series monitor.

9.SAVE THESE INSTRUCTIONS

WIRING

ELECTRIC SHOCK HAZARD. Disconnect all power before installing or servicing heater. Failure to do so could result in personal injury or property dam- age. Heater must be effectively grounded in accor- dance with the National Electrical Code, NFPA 70.

All electrical wiring must be done by a qualified person in accordance with National Electrical Code (NEC) and meet all state and local regulations.

1.Use heater only at the voltage specified on the nameplate.

2.Branch circuit wire for connection to heater must be at least 90°C wire. Use copper conductors only.

3.The heater connection points are located in the gasketed termi- nal enclosure. To remove cover, remove 4 screws on the cover. Remove the cover to expose wiring connection points.

4.A green ground terminal is provided in the bottom of the enclo- sure. The ground wire should be connected before other con- nections are made.

5.Refer to Table 1 for proper entrance wiring size.

6.Heater can be wired with rigid or flexible conduit.

Grill Kit Selection Guide

Model

Volts

Watts

Optional Grill Kit

RBC-1101

120

1000

 

RBC-1108

208

1000

 

RBC-1102

240

1000

168-053169-085

RBC-1107

277

1000

 

RBC-11034

347

1000

 

RBC-1151

120

1500

 

RBC-1158

208

1500

 

RBC-1152

240

1500

68-053169-086

RBC-1157

277

1500

 

RBC-11534

347

1500

 

RBC-1208

208

2000

 

RBC-1202

240

2000

68-053169-087

RBC-1207

277

2000

 

RBC-12034

347

2000

 

RBC-1258

208

2500

 

RBC-1252

240

2500

68-053169-088

RBC-1257

277

2500

 

RBC-12534

347

2500

 

 

 

 

 

MAINTENANCE

Replacement Parts

ELECTRIC SHOCK HAZARD. Disconnect all power

Model

Volts

Watts

Element

before servicing or replacing heating elements.

RBC-1101

120

1000

322-074905-143

 

The reflectors should be kept clean to obtain the maximum

RBC-1108

208

1000

322-074905-144

 

RBC-1102

240

1000

322-074905-145

radiant output.

RBC-1107

277

1000

322-074905-146

Element Replacement

RBC-11034

347

1000

322-074905-147

RBC-1151

120

1500

322-074905-148

1.

Remove Terminal Box Cover.

RBC-1158

208

1500

322-074905-149

2.

Disconnect lead wires from heater terminals and disengage box

 

from conduit /cable fitting.

RBC-1152

240

1500

322-074905-150

3.

Remove safety grills (if installed).

RBC-1157

277

1500

322-074905-151

4.

Loosen (2) 3/8” nuts from the terminal box bracket located on

RBC-11534

347

1500

322-074905-152

 

the back of the heater and slide the entire heating element

RBC-1208

208

2000

322-074905-153

 

assembly out of the reflector assembly.

5.

RBC-1202

240

2000

322-074905-154

Remove bulkhead fitting nut and washers.

RBC-1207

277

2000

322-074905-155

6.

Remove failed element and replace with a new element.

RBC-12034

347

2000

322-074905-156

7.

Place gasket on the bulkhead fitting and insert terminals and fit-

RBC-1258

208

2500

322-074905-157

8.

ting into the element hole in the terminal box.

Place washer and nut on the bulkhead fitting and tighten.

RBC-1252

240

2500

322-074905-158

9.

Reassemble by following the reverse procedures (steps 4

RBC-1257

277

2500

322-074905-159

 

through 1)

RBC-12534

347

2500

322-074905-160

 

 

 

 

 

 

3

Image 3
Contents Depth Min Wire GaModel AmperageGeneral InstallationModel Volts Watts Element WiringMaintenance Model Volts Watts Optional Grill KitLimited Warranty

PG442 specifications

The Chromalox PG442 represents a significant advancement in the field of temperature control solutions, providing users with an efficient and reliable means of managing heating requirements in various industrial applications. This cutting-edge product is designed to meet the demands of diverse environments while ensuring high performance and durability.

One of the main features of the PG442 is its ability to operate over a wide temperature range, making it suitable for numerous applications, from processing to manufacturing. This flexibility is complemented by its precise temperature control capabilities, which allow users to maintain the desired temperature stability needed for optimal operational efficiency.

The PG442 utilizes advanced solid-state relay technology, ensuring faster response times and reducing mechanical wear associated with traditional relay systems. This electronic control mechanism not only enhances the unit's reliability but also prolongs its service life, offering significant cost savings in maintenance and downtime.

Another remarkable characteristic of the Chromalox PG442 is its user-friendly interface, which simplifies the programming and monitoring process. The intuitive controls enable easy adjustments and provide real-time feedback on performance metrics, ensuring that users can quickly respond to any changes in operational conditions. This enhances overall operational productivity and ensures that essential processes run smoothly without interruptions.

The device is also built with robust materials that can withstand harsh industrial environments, ensuring resilience against heat, moisture, and other challenging conditions. This durability is a key consideration for industries such as food processing, pharmaceuticals, and chemical manufacturing, where environmental variables can impact product quality and safety.

In addition, the PG442 is designed with energy efficiency in mind. Its innovative design minimizes energy consumption without compromising performance, making it an environmentally friendly solution that aligns with many organizations' sustainability goals.

Supporting a variety of installation configurations, including wall-mounted and panel-mounted options, the PG442 offers versatility for different setups. This adaptability makes it a practical choice for both new installations and retrofitting existing systems.

In conclusion, the Chromalox PG442 stands out as a leading solution for industrial heating applications. With its advanced technology, user-friendly design, robust construction, and energy efficiency, it provides businesses with the tools they need to enhance productivity and ensure consistent performance across their operations. The PG442 is a testament to Chromalox's commitment to quality and innovation in temperature control solutions.