Operation, Maintenance | Chromalox PN400-3 specs

WIRING

Typical Wiring Diagram for

Type RST and RSTO

Figure 2

OPERATION

CAUTION: To avoid possible damage to the heater, do not energize until the tank is filled with fluid. Recommended fluid level is 2” above the heater tube or pipe.

1.Turn the master circuit breaker off and open the control box door.

2.Set the indicating temperature control at the desired temperature and the over-temperature cutout 50°F above this temperature.

3.Close the control box door and turn the circuit breaker on. To energize the heater circuits, turn the on-off selector switch to the “on” position.

MAINTENANCE

CAUTION: Hazard of Electrical Shock. Disconnect all power before servicing or replacing the heaters.

1. To remove the heating element, first turn the circuit breaker to the off position. Then open the control box door and remove the screws from the sheet metal isolating panel located in the lower half of the control box.

2. When removing the heating elements, make certain that the ter- minals and the ceramic insulators (RSTO type only) do not contact oil or any other liquid foreign matter.

Note: Chromalox cannot be responsible for failures or damage caused by contamination on the ceramic insulators.

3.Next remove the element wiring and finally the element mounting screw. Now pull the element straight out of the heat- ing tube.

4.Note: Check electrical connections at heater terminals and tighten if necessary. This will help avoid hot temrinals which could destroy wiring insulation or heater terminals.

-3-

PN400-3 specifications

The Chromalox PN400-3 is a state-of-the-art electric heating system designed to provide efficient and reliable heating solutions in various industrial applications. This versatile unit is equipped with advanced technologies and features that set it apart from traditional heating systems.

One of the primary characteristics of the PN400-3 is its robust construction, which ensures durability and longevity. Built to withstand harsh environmental conditions, this unit is ideal for industries such as oil and gas, chemical processing, and manufacturing. Its high-grade materials resist corrosion and can endure extreme temperatures, making it suitable for both indoor and outdoor applications.

The PN400-3 incorporates advanced thermal management technologies, allowing for precise temperature control. This feature is crucial in settings where maintaining specific heat levels is necessary for process efficiency and safety. The unit is designed with an innovative controller that enables users to set and monitor temperatures remotely, ensuring optimal performance at all times.

Energy efficiency is a key consideration in the design of the PN400-3. This electric heating system utilizes high-efficiency heating elements that reduce energy consumption while maximizing output. By optimizing energy use, the PN400-3 not only lowers operating costs but also minimizes the environmental impact, aligning with today's sustainability goals.

Another notable feature is its modular design, which offers flexibility for various installation configurations. The PN400-3 can be easily integrated into existing systems or set up as a standalone unit. This adaptability makes it an excellent choice for businesses looking to enhance their heating capabilities without extensive modifications to their current infrastructure.

Safety is paramount in any industrial setting, and the PN400-3 is equipped with multiple safety features, including over-temperature protection, fault indicators, and emergency shutoff capabilities. These safety measures help prevent dangerous situations and ensure that operators can work with confidence.

In conclusion, the Chromalox PN400-3 electric heating system stands out due to its rugged construction, energy efficiency, precise temperature control, and safety features. Its innovative design and advanced technologies make it a top choice for industries that require reliable and efficient heating solutions, ultimately contributing to improved operational efficiency and safety in the workplace.