Model 3VG79A, General Safety Information

Dayton Operating Instructions and Parts Manual

Model 3VG79A

General Safety Information

Make certain you read and understand all warnings. Keep these instructions for reference. They are your guide to safe and proper operation of this heater.

Safety information appears throughout these instructions. Pay close attention to them. Below are definitions for the safety information listed throughout this manual.

Under this heading, installation, operat-

ing, and maintenance procedures or practices will be found that, if not carefully followed, WILL result in IMME- DIATE serious personal injury or death.

Under this head- ing, installation, operating, and maintenance proce-

dures or practices will be found that, if not carefully followed, COULD result in severe personal injury or death.

Under this heading, installation, operat-

ing, and maintenance procedures or practices will be found that, if not carefully followed, COULD result in minor personal injury, product or property damage.

IMPORTANT: Every possible circumstance that might involve a hazard cannot be anticipated. The warnings in this manual and on tags or decals affixed to the unit are therefore not all-inclusive. If a procedure, work method, or operating technique not specifically recommended by Dayton is used, you must make sure it is safe for you and others. You should also ensure that equipment will not be damaged or made unsafe by the operat- ing or maintenance method you choose.

Carbon monoxide poisoning may lead

to death! Some people are more affected by carbon monoxide than others. Early signs of carbon monoxide poisoning resemble the flu, with headaches, dizziness, and/or nausea. If you have these signs, the heater may not be operating properly, or the areas may not be sufficiently ventilated. Get fresh air at once! Have heater serviced.

Improper use of this heater can

cause serious injury or death from burns, fire, explosion, electrical shock, and carbon monoxide poisoning.

Make certain you read and understand all warnings. Keep these instructions for reference. They are your guide to safe and proper operation of this heater.

• Use only Kerosene or No. 1

fuel oil to avoid risk of fire or explo- sion. Never use gasoline, naphtha, paint thinners, alcohol, or other highly flammable fuels.

•Fueling

a)Personnel involved with fueling shall be qualified and thoroughly familiar with the manufacturer's instructions and applicable federal, state, and local regulations regard- ing the safe fueling of heating units.

b)Only the type of fuel specified on the heater's data plate shall be used.

c)All flame, including the pilot light, if any, shall be extinguished and the heater allowed to cool, prior to fueling.

d)During fueling, all fuel lines and fuel-line connections shall be inspected for leaks. Any leaks shall be repaired prior to returning the heater to service.

e)At no time shall more than one day's supply of heater fuel be stored inside a building in the vicinity of the heater. Bulk fuel storage shall be outside the structure.

f)All fuel storage shall be located a minimum of 25 feet from heaters, torches, welding equipment, and similar sources of ignition (excep- tion: the fuel reservoir integral with the heater unit).

g)Whenever possible, fuel storage shall be confined to areas where floor penetrations do not permit fuel to drip onto or be ignited by a fire at lower elevation.

h)Fuel storage shall be in accor- dance with the federal, state, or local authority having jurisdiction.

•Never use heater where gasoline, paint thinner, or other highly flammable vapors are present.

•Follow all local ordinances and codes when using heater.

•Heaters used in the vicinity of tarpaulins, canvas, or similar enclo- sure materials shall be located a safe distance from such materials. The recommended minimum safe dis- tance is 10 feet. It is further recom- mended that these enclosure materials be of a fire retardant nature. These enclosure materials shall be securely fastened to prevent them from igniting or from upsetting the heater due to wind action.

Version B - For Reduction

G016.J

3VG79A specifications

The Dayton 3VG79A is a versatile and high-performance variable speed air ventilator that is designed to enhance air quality while providing optimal energy efficiency. Known for its robust build and innovative technology, the 3VG79A is particularly suitable for a wide range of commercial and industrial applications.

One of the standout features of the Dayton 3VG79A is its variable speed motor. This technology allows users to adjust airflow based on specific requirements, ensuring that energy consumption is minimized while maintaining desired ventilation levels. The ability to modify speeds not only contributes to energy savings but also enhances the overall comfort of any environment by providing just the right amount of ventilation when needed.

The Dayton 3VG79A is equipped with a durable construction that includes corrosion-resistant materials, making it suitable for use in a variety of settings where durability is crucial. Whether installed in a warehouse, factory, or commercial building, the ventilator is built to withstand challenging conditions over time.

In terms of performance, the Dayton 3VG79A delivers impressive air-moving ability, with a maximum airflow rate that meets the demands of even the most air-intensive environments. This capability ensures that spaces remain well-ventilated, preventing stale air buildup and promoting a healthier indoor atmosphere.

The 3VG79A also features an integrated control system, allowing for easy monitoring and adjustments. Users can effortlessly switch between automated settings or manual control, providing flexibility and convenience. Advanced safety mechanisms are also in place, including overcurrent protection, to ensure reliable operation.

Another key characteristic of the Dayton 3VG79A is its relatively low noise level. Despite its powerful performance, the commitment to quieter operation allows it to be used in sensitive environments, where excessive noise could be disruptive.

In summary, the Dayton 3VG79A stands out due to its variable speed motor, durable construction, high airflow performance, user-friendly control system, and low noise level. These features make it an excellent choice for businesses seeking an efficient, reliable, and versatile ventilation solution, ultimately improving air quality and energy efficiency for various applications.