Installation in a Fireplace Opening, Operation

Installation in a Fireplace Opening

At the rear of the fire, two adjustable supports are provided for levelling the fire where the base of the fireplace opening is raised above the level of the hearth.

Adjust by removing the two screws holding each bracket in position, then refit the bracket and the two screws in the re- quired position.

The metal surround at the rear of the fire may be removed if full inset of this fire is required.

Operation

The unique flame effect may be enjoyed whether or not the heating elements are in operation.

Lamp Replacement

There is one lamp located beneath the fuel effect. To gain access to the lamp, remove the coal and place in a con- tainer, lift out the plastic fuel effect to reveal the lamp.

Replace the defective lamp with a 240V 60W fire glow 2 pin bayonet cap lamp.

Replace plastic fuel effect and coals.

Safety cut-out

For your safety, this appliance has been fitted with thermal cut-out. In the event that the product overheats, the cut-out switches the heat off automatically.

To bring the heat back into operation, remove the cause of the overheating, then unplug or turn off the electrical supply to the heater for up to 10 minutes.

When the heater has cooled sufficiently, re-connect and switch on the heater.

Controls

The heater controls are located on the right hand side of the canopy heat outlet.

Three switches provide a choice of heat settings.

A switch is in the ON position when the red indicator mark on the switch is visible.

Fig. 2

Switch 1 - Controls the electricity supply to the heater and the flame effect.

Note: This switch must be in the ON position for the heater to operate.

Switch 2 - Provides 1kw heat output.

Switch 3 - Provides 2kw heat output with switch 2.

Maintenance

WARNING – BEFORE UNDERTAKING ANY MAINTENANCE OR CLEANING, REMOVE PLUG OR DISCONNECT FROM THE ELECTRICITY SUPPLY.

Cleaning

Before commencing cleaning, unplug the heater and allow it to cool.

The surfaces of the heater should be given an occasional wipe over with a dry soft cloth.

Do not use detergents, abrasive cleaning powder or polish on the metal body of the heater.

The glass screen should be cleaned carefully with a chamois leather. DO NOT use proprietary cleaners.

To remove any accumulation of dust or fluff the soft brush attachment of a vacuum cleaner should occasionally be used to clean the outlet grille of the fan heater located under the canopy.

To clean the fuel effect, remove the coal pieces and wash in warm water. The plastic tray should be wiped clean with a damp cloth. When dry replace the coal pieces and arrange for best effect.

After Sales Service

Your appliance is guaranteed for one year from the date of purchase. We undertake to repair or exchange free of charge within this period, any part with the exception of a lamp found to be defective due to a manufacturing fault.

Your rights under this guarantee are additional to your statu- tory rights, which in turn are not affected by this guarantee.

Please retain your receipt as proof of purchase.

The product complies with the European Safety Standards EN60335-2-30 and the European Standard Electromagnetic Compatibility (EMC) EN55014, EN60555-2 and EN60555-3 which cover the essential requirements of EEC Directives 73/23 and 89/336

Glen Dimplex UK Limited

Millbrook House

Grange Drive

Hedge End

Southampton

Hampshire. SO30 2DF

UK customer help line (8.00AM – 6.00PM Mon-Fri; 8.30AM-1.00PM Sat)

Customer Services:	Tel.	0870 7270101
	Fax.	0870 7270102
	e-mail	customer.services@glendimplex.com
Republic of Ireland	Tel.	01 8424833

ROD20 specifications

The Dimplex ROD20 is an innovative and versatile electric radiator designed to meet the modern heating needs of various living spaces. With a sleek and stylish design, the ROD20 complements contemporary interiors while providing efficient and effective heat distribution. Its advanced technology ensures that it delivers warmth in a way that is both energy-efficient and environmentally friendly.

One of the main features of the ROD20 is its responsive digital thermostat. This allows users to easily set and maintain their desired temperature, ensuring comfort without wasting energy. The thermostat can adjust the heating output based on the current room temperature, allowing for consistent warmth and reducing the likelihood of overheating.

The ROD20 also incorporates a unique energy monitoring system. This technology enables users to track their energy consumption in real time, offering insights into how to optimize their heating for greater efficiency. By utilizing this feature, homeowners can make informed decisions about their heating usage, ultimately leading to cost savings and a reduced carbon footprint.

Another characteristic of the Dimplex ROD20 is its rapid heat-up time. Designed with efficient heating elements, the radiator quickly warms up a space, providing immediate comfort when needed. This is particularly beneficial during cold months where quick heating can make all the difference.

Safety is paramount with the ROD20. It is equipped with several safety features, including overheat protection, which automatically shuts off the radiator if it exceeds a certain temperature, and an anti-tip mechanism that provides stability and peace of mind, particularly in households with children or pets.

In addition to its practical features, the Dimplex ROD20 is designed for ease of installation and maintenance. It can be mounted on the wall or used as a freestanding unit, offering flexibility based on the user’s needs and preferences. The exterior is also easy to clean, ensuring that it will maintain its aesthetic appeal over time.

Overall, the Dimplex ROD20 is a blend of cutting-edge technology and thoughtful design, making it an ideal choice for anyone looking to enhance their home’s heating solutions effectively and efficiently. Whether for a living room, bedroom, or office space, the ROD20 provides reliable warmth tailored to modern lifestyles.