Important Safety Advice

Installation and Operating Instructions

Air Warmer: Model No. HAW1000N

08/50511/0

Issue 0

Dimensions (millimetres)

	Watts	Electrical Supply	Weight (kg)
HAW1000N	1000	230-240V ~1PN	14	115
				115

207

470

Fig. 1

THESE INSTRUCTIONS SHOULD BE READ CAREFULLYAND RETAINED FOR FUTURE REFERENCE

Do not locate above or below a fixed socket outlet.

The heater including the supporting legs can get very hot; therefore do not mount directly on any combustible material. Suitable fire resistant material is required between the heater and any combustible base or support.

Warning: Before obtaining access to the terminals all supply circuits must be disconnected.

The heater should be installed to allow a reasonable air flow around the heater.

A prominent notice should be provided where the heater is sited ‘Keep Clear and Unobstructed’.

Avoid exposure to water.

The heaters are not suitable for general domestic use.

The heater is suitable for a drying room provided that the heater has suitable ventilation.

A mains lead which can operate at + 110°C must be used.

An all-pole isolating switch with a minimum separation of 3mm in each pole must be fitted adjacent to the heater to facilitate local isolation.

General

This carton contains:

•1 HAW1000N heater

•1 Foldable guard

Electrical connection

WARNING – THIS APPLIANCE MUST BE EARTHED.

Verify that the electrical supply cable is sufficient for the rated loading. Check that the incoming supply conforms to the rated supply.

The heater power circuit must be protected by a suitably rated over current device.

The incoming cables must be connected to the factory fitted heater terminals provided. Do not alter any factory fitted wiring.

The Terminal Cover Casting can be removed to access the terminals, by removing the 2 screws fixing the cover - see Fig. 2.

WARNING: Ensure the power cable path does not come into contact with the heater element.

The heater is supplied with an earth stud, located inside the terminal box, which must be connected to earth.

After connection check the continuity of earth connections.

Fig. 2

Installation

The installation should be carried out by a suitably qualified electrician/ engineer in accordance with applicable standards.

Remove all items from the packaging. The heater should be fixed using the fixing points provided - see Fig. 3. Ensure the heater is securely fastened.

179

449

Fig. 3

Remove the terminal cover and connect the mains cable, while making note of the path the connecting cable should take through the guard.

Reattach the terminal cover to the heater and fasten the cable gland.

Mount the guard over the heater. Ensure the guard is mounted centrally relative to the heater as shown in Fig. 4.

The heater should not be connected until the instruction leaflet has been read fully.

HAW1000N specifications

The Dimplex HAW1000N is an innovative heating solution designed to provide efficient warmth and comfort in residential and commercial spaces. Renowned for its stylish design and advanced technology, this unit is a popular choice for those seeking both aesthetics and functionality in their heating systems.

One of the standout features of the HAW1000N is its powerful 1000-watt heating capacity, which ensures rapid heating of rooms up to 20 square meters. This makes it ideal for bedrooms, offices, and smaller living areas, where quick and effective warmth is essential. Its compact and portable design allows users to easily move it from room to room, providing flexible heating solutions wherever it is needed.

The Dimplex HAW1000N incorporates advanced fan-assisted heating technology, which helps to distribute heat evenly throughout the space. This fan-driven approach ensures that warm air is circulated effectively, eliminating cold spots and delivering consistent heating performance. The adjustable thermostat enables users to set their desired room temperature, enhancing comfort while promoting energy efficiency.

Safety is a significant consideration in the design of the HAW1000N. It features an overheat protection system that automatically switches the unit off if it detects excessive temperatures, preventing potential hazards. Additionally, it has a tip-over switch that cuts power if the heater is accidentally knocked over, making it a safe option for households with children or pets.

The unit is also equipped with a user-friendly control panel, offering various heat settings that allow for customized comfort levels. The sleek, modern aesthetic of the HAW1000N fits seamlessly into any room decor, making it not just a functional appliance but also a stylish addition to home interiors.

In terms of energy efficiency, the Dimplex HAW1000N is designed to minimize energy consumption while providing immediate warmth. Its effective heating technology ensures that users can enjoy a cozy environment without incurring excessive energy bills.

Overall, the Dimplex HAW1000N stands out as a reliable and efficient heating solution that combines high-performance features, safety, and stylish design, making it an excellent choice for enhancing comfort in any space. Whether for personal use or in commercial settings, this heater promises to deliver warmth just when you need it.