Desa BC55T, BC40, BC70T Assembly, For 40, 55T, and 70T Models only, For 115T and 165T Models only

Page 4

ASSEMBLY

(FOR 40, 55T, AND 70T MODELS ONLY)

These models are furnished with a nose cone guard. Nose cone guard and mounting screws are found in the shipping carton.

Tools Needed

• 5/16" Nut Driver or Wrench

1.Place nose cone guard on top of upper shell flange. Make sure nose cone guard is on hot air outlet end of heater.

2.Insert screws through nose cone guard and upper shell flange.

3.Tighten screws firmly.

Nose Cone

Guard

Screw

Hot Air

Outlet

Upper Shell

Flange

(FOR 115T AND 165T MODELS ONLY)

These models are furnished with wheels and a front handle. Some models are furnished with a rear handle also. Wheels, handle(s), and the mounting hardware is found in the shipping carton.

Tools Needed

•Medium Phillips Screwdriver

•3/8" Open or Adjustable Wrench

•Hammer

1.Slide axle through wheel support frame. Install wheels on axle.

IMPORTANT: Place extended hub of wheel toward wheel support frame.

2.Place cap nuts on axle ends. Gently tap with hammer to secure.

3.Place heater on wheel support frame assem- bly. Make sure air inlet end of heater is over wheels.

4.Place front handle on top of fuel tank flange. Insert screws through handle(s), fuel tank flange and wheel support frame. Attach nut finger tight after each screw is inserted.

5.Tighten all nuts firmly.

 

Front

 

 

Handle

Rear Handle

 

 

 

 

(If Equipped)

Hot Air

Screw

 

Outlet

 

 

Figure 4 - Nose Cone Guard Assembly,

40/55T/70T Models Only

Fuel Tank

 

Air Inlet

 

 

Flange

 

 

Wheel

 

 

Support

 

 

Frame

 

 

Wheel

 

 

 

 

Extended Hub

Cap Nut

Nut

Axle

 

Figure 5 - Wheel and Handle Assembly,

 

115T/165T Models Only

4

www.desatech.com

111168-01A

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Table of Contents Safety Information UnpackingProduct Identification Assembly For 40, 55T, and 70T Models onlyFor 115T and 165T Models only Tighten all nuts firmlyTheory of Operation FuelsVentilation OperationTo Start Heater To Stop HeaterPreventative Maintenance Schedule Or ShippingTroubleshooting Fault Condition Possible Cause RemedyService Procedures Upper Shell RemovalFAN Lift upper shell off Remove fan guardAIR OUTPUT, AIR Intake and Lint Filters Pump Pressure AdjustmentReplace filter end cover Fuel Filter IgnitorNozzle Assembly Fuel and AIR Line Replacement and Proper Routing Nozzle and Nozzle Adapter All ModelsProcedure if Rotor is Binding Pump RotorWiring Diagrams Ignition Control AssemblyIllustrated Parts Breakdown Models BC40 and RC40Parts List NTC-4CModels BC55T, RC55T, BC70T, and RC70T Models BC55T RC70TModels BC115CT, RC115CT, BC165CT and RC165CT KEY Part Number Illustrated Parts Breakdown Models BC40, RC40, BC55T, RC55T, BC70T and RC70T FHPF3-6CSpecifications Accessories Ignition Control Assembly Photocell Tester HA1170Thermostat KIT HA1210 AIR Gauge KIT HA1180Warranty and Repair Service Keep this WarrantyTable DES Matière RC115CT, BC165CT ET RC165CTInformations SUR LA Sécurité DeballageNomenclature DES Pieces Principales ModèleMontage Pour LE Modèles 40, 55T ET 70T SeulementPour LES Modèles 100 ET 150 Seulement Serrez fermement tous les écrous à la cléCombustibles Dʼair propre chaudVaporisé dans la chambre de combustion Des odeurs perceptiblesRemise EN Service FonctionnementMise EN Marche ArretOU Expédition Calendrier D’ENTRETIENDiagnostic DES Pannes Anomalie Cause Possible RemedeDémontage DU Couvercle Entretien Marche a SuivreVentilateur Réglage DE LA Pression DE LA Pompe Filtres de sortie et d’entréeAllumeur Dépose du filtre à combustible, modèles 40/55T/70TBuse Entretien Marche a Vérifiez que le manchon de la buse nʼest pas endommagéRotor DE LA Pompe Déposez le couvercle voir Démontage du couvercle,Retirez le cache-filtre et les filtres à air Déposez le couvercle de la pompeSchemas Electriques Commande D’ALLUMAGEVUE Détaillée DES Pièces Modèles BC40 ET RC40Liste DES Pièces Modèles BC55T, RC55T, BC70T ET RC70T Support de porte-buse 55T Modèles BC115CT, RC115CT, BC165CT ET RC165CT Référence VUE Détaillée DES Pièces Modèles BC40, RC40, BC55T, RC55T, BC70T ET RC70T Vis 55TFiche Technique Accessoires Manometre HA1180Roues ET Guidon Pour Travail Intensif HA1202 Thermostat HA1210Ntie ET Service APRES-VENTE Gardez Cette Garantie

RC70T, RC165CT, BC55T, BC70T, RC115CT specifications

Desa BC165CT, RC55T, BC55T, RC165CT, and BC70T are some of the advanced heating solutions designed to provide maximum comfort and efficiency in various environments. Each model comes with unique features and technologies aimed at meeting diverse heating demands while ensuring energy efficiency.

The Desa BC165CT is particularly notable for its robust heating capacity. Designed for larger spaces, it utilizes a powerful combustion system that enables it to produce a significant amount of heat quickly. This model features an innovative thermostat that allows users to set their desired temperature, ensuring a comfortable environment all year round. Its compact design allows for versatile placement in residential or commercial settings.

The RC55T model stands out for its versatility and user-friendly operation. This unit is engineered with a remote control feature, enabling users to adjust settings from the comfort of their seats. Its sleek design and modern aesthetics make it a perfect fit for contemporary interiors, while its energy-efficient technology ensures reduced operating costs.

Moving to the BC55T, this model strikes a balance between performance and efficiency. It offers multiple heat settings, enabling users to choose the most suitable level of warmth for their space. The BC55T is also designed for quiet operation, making it an ideal choice for bedrooms or study areas. The built-in safety mechanisms ensure reliable performance without compromising safety.

The RC165CT is designed for those who desire enhanced features in their heating system. Equipped with advanced digital controls, this model allows for precise temperature management and programming. Its high-efficiency burner reduces fuel consumption while generating impressive heat output, making it a cost-effective option for homeowners.

Finally, the BC70T adds an extra layer of convenience with its larger heating capacity, ideal for bigger spaces. This model incorporates advanced technology that optimizes fuel usage and minimizes emissions, aligning with modern environmental standards. The BC70T also features an intuitive control panel, making it easy to navigate through its settings and adjust the heating according to individual needs.

In summary, the Desa BC165CT, RC55T, BC55T, RC165CT, and BC70T models offer innovative heating solutions characterized by energy efficiency, user-friendly features, and adaptable designs. These units are engineered to meet the demands of various environments while providing reliable warmth and comfort.
Top Page Image Contents