Desa FA-3B, FA-5B, FAS-3C Attaching Mounting Bracket To Wall, Placing Heater On Mounting Bracket

Page 9

OWNER’S MANUAL

INSTALLATION

Continued

Attaching Mounting Bracket To Wall

Note: Wall anchors, mounting screws, and spacers are in hardware package. The hard- ware package is provided with heater.

Attaching to Wall Stud Method

For attaching mounting bracket to wall studs

1.Drill holes at marked locations using 9/64" drill bit.

2.Place mounting bracket onto wall. Line up last hole on each end of bracket with holes drilled in wall.

3.Insert mounting screws through bracket and into wall studs.

4.Tighten screws until mounting bracket is firmly fastened to wall studs.

Attaching to Wall Anchor Method

For attaching mounting bracket to hollow walls (wall areas between studs) or solid walls (concrete or masonry)

1.

Drill holes at marked locations using

 

5/16" drill bit. For solid walls (concrete

 

or masonry), drill at least 1" deep.

2.

Fold wall anchor as shown in Figure 10.

3.

Insert wall anchor (wings first) into

 

hole. Tap anchor flush to wall.

4.

For thin walls (1/2" or less), insert red

 

key into wall anchor. Push red key to

Figure 10 - Folding Anchor

Figure 11 - Popping Open Anchor Wings For Thin Walls

Placing Heater On Mounting Bracket

1.Locate two horizontal slots on back panel of heater (see Figure 12).

2.Place heater onto mounting bracket. Slide horizontal slots onto stand-out tabs on mounting bracket.

Horizontal Slots

Installing Bottom Mounting Screws

1.Locate two bottom mounting holes. These holes are near bottom on back panel of heater (see Figure 13).

2.Mark screw locations on wall.

3.Remove heater from mounting bracket.

4.If installing bottom mounting screws into hollow or solid wall, install wall anchors. Follow steps 1 through 4 un- der Attaching To Wall Anchor Method. If installing bottom mounting screw into wall stud, drill holes at marked lo- cations using 9/64" drill bit.

5.Replace heater onto mounting bracket.

6.Place spacers between bottom mount- ing holes and wall anchor or drilled hole.

7.Hold spacer in place with one hand. With other hand, insert mounting screw through bottom mounting hole and spacer. Place tip of screw in opening of wall anchor or drilled hole.

8.Tighten both screws until heater is firmly secured to wall. Do not over tighten.

Note: Do not replace front panel at this time. Replace front panel after making gas connections and checking for leaks (see pages 10 and 11).

 

“pop” open anchor wings (see Figure

 

11). IMPORTANT: Do not hammer

 

key!For thick walls (over 1/2" thick)

 

or solid walls, do not pop open wings.

5.

Place mounting bracket onto wall. Line

 

up last hole on each end of bracket with

 

wall anchors.

6.

Insert mounting screws through bracket

 

and into wall anchors.

7.

Tighten screws until mounting bracket

 

is firmly fastened to wall.

Stand-Out Tab

Mounting Bracket

(attached to wall)

 

Figure 12 - Mounting Heater Onto

Mounting Bracket

Figure 13 - Installing Bottom Mounting

Screws

Continued

105566

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents What to do if YOU Smell GAS Infrared VENT-FREE Natural GAS HeaterInfrared Natural GAS Heater Safety InformationProduct Identification Product FeaturesLocal Codes UnpackingProducing Adequate Ventilation Fresh AIR for Combustion and VentilationUnusually Tight Construction Confined and Unconfined SpaceFresh AIR for Combustion Ventilation Determining FRESH-AIR Flow for Heater LocationDetermining if You Have a Confined or Unconfined Space Ventilation AIR Ventilation Air From Inside BuildingVentilation Air From Outdoors Installation Items InstallationInstalling Thermostat Sensing Bulb Check GAS TypeMounting Bracket Installing Heater to WallRemoving Front Panel Of Heater Models FA-3B and FA-5B Methods For Attaching Mounting Bracket To WallInstalling Bottom Mounting Screws Attaching Mounting Bracket To WallPlacing Heater On Mounting Bracket Typical Inlet Pipe Diameters Connecting to GAS SupplyPressure Testing Gas Supply Piping System For Your Safety Read Before LightingPressure Testing Heater Gas Connections Operating HeaterLighting Instructions Manual Lighting ProcedureTo Select Heating Level To Turn OFF GAS To ApplianceThermostat Models FAS-3C and FAS-5C Inspecting Burner Cleaning and MaintenanceObserved Problem Possible Cause Remedy TroubleshootingInfrared Natural GAS Heater Top Parts Centrals SpecificationsService Hints Replacement PartsTechnical Service AccessoriesBurner Assembly ODS/Pilot Assembly Illustrated Parts BreakdownFA-3B KEY FA-3B Description Parts ListFA-5B KEY FA-5B Description FAS-3C ODS/Pilot Assembly Burner AssemblyKEY FAS-3C Description QTY FAS-5C KEY FAS-5C Description QTY International Warranty Information

FAS-5C, FAS-3C, FA-3B, FA-5B specifications

Desa FA-3B, FAS-5C, FA-5B, and FAS-3C represent a significant evolution in the landscape of consumer electronics, particularly in the realm of audio systems and smart home technologies. Each model brings unique features and advancements, catering to varied user needs and preferences.

The Desa FA-3B stands out with its robust sound quality and sleek design. This model incorporates advanced acoustic engineering, ensuring clear highs and deep bass response. It features Bluetooth connectivity, allowing users to seamlessly connect their devices for wireless streaming. The user-friendly interface includes customizable equalizer settings, enabling audiophiles to fine-tune their listening experience. Furthermore, the FA-3B is designed to integrate easily with existing smart home ecosystems, supporting voice commands via popular virtual assistants.

FAS-5C, on the other hand, is geared toward the immersive audio experience. It features surround sound technology, perfect for home theater setups. Users can enjoy a dynamic audio landscape, whether it's for movies, music, or gaming. The FAS-5C is equipped with multiple input options, including HDMI and optical audio, ensuring compatibility with a wide range of devices. Additionally, its aesthetic design blends well with modern interiors, making it a stylish addition to any home.

Moving on to the FA-5B, this model is known for its portability and versatility. The compact design allows for easy transport, making it ideal for outdoor gatherings or travel. The FA-5B does not compromise on sound quality despite its size, featuring a powerful battery that supports hours of playback time. Its rugged exterior provides durability, ensuring it can withstand various environments. The built-in voice assistant compatibility and touch controls enhance the user experience, offering convenience for on-the-go lifestyles.

Lastly, the FAS-3C is designed for those who crave a premium listening experience at home. It features high-definition audio playback, ensuring that even the subtlest nuances in music are captured accurately. The model supports high-resolution audio formats, appealing to audiophiles who demand the best quality. Advanced wireless technologies enable multi-room audio capability, allowing users to synchronize sound throughout their homes. The FAS-3C's elegant design is complemented by customizable lighting features, adding an element of personalization and ambiance.

In summary, Desa FA-3B, FAS-5C, FA-5B, and FAS-3C each bring distinctive features, technologies, and characteristics, catering to diverse audio preferences and lifestyles. Whether for home entertainment or portable listening, these models exemplify modern innovation in audio technology.
Top Page Image Contents