Connection, Specifications | Nady Systems CX-22SW manual

5.PHASE SWITCHES:

These allow switching the polarity to invert the signal phase on the HIGH ways. This is done after the output levels are set to correct audible phase problems.

Caution: Before pressing the PHASE switches, always lower the outputs of your power amplifiers to avoid possible speaker damage.

6.SUB CROSSOVER FREQUENCY CONTROL:

This selects the crossover frequency of the SUB WOOFER way. You can select the frequency between 50 Hz to 250 Hz.

7.SUBWOOFER OUTPUT LEVEL CONTROL:

This is used to adjust the SUB WOOFER output level.

8.SUBWOOFER LOW CUT SWITCHES:

This inserts a low cut filter in the SUBWOOFER way with a 12dB/Octave, 30 Hz HPF to minimize problems from subsonic frequencies in the signal, to suppress hum, and to prevent low frequency subwoofer speaker resonance.

CONNECTION

9.FUSE COMPARTMENT:

Replace with only the same type fuse (1.0A/250V). If it blows continuously, do not use the unit until it has been serviced by qualified personnel.

10.STEREO INPUT CONECTORS:

Connect your L/R stereo input signal to either the balanced XLR or the unbalanced 1/4" input jacks.

11.OUTPUT CONECTORS:

Connect to your amplifiers via these unbalanced 1/4" output jacks.

12.AC VOLTAGE SELECTOR SWITCH:

Before plugging in the power cord, check to see that the unit is set for the proper voltage for your area:~115V (60Hz) or ~230V (50Hz).

13.AC CORD

SPECIFICATIONS
Crossover Type	Stereo 2 ways + Subwoofer
Crossover Range	Subwoofer: 50 - 250Hz, -24/10dB
	Low/High : 250-6000Hz, -24/10dB
Filter Type (Slope)	2nd order, 12dB/Octave
Inputs
Type	Balanced XLR and unbalanced 1/4"
Impedance	100 Kohms
Outputs
Type	Unbalanced 1/4"
Impedance	220 Ohms
Low Cut Filters	30Hz/ - 3dB, 12dB/Octave
Frequency Response	20Hz - 25KHz +/-1dB
Total Harmonic Distortion (THD) + Noise	< 0.05 %
S/N Ratio	> 95 dB
Fuse	1.0 A/ 250V, 5mm glass type
Dimensions	19’’ x 1.73’’ x 5.9’’ (483 X 44 X 150mm)
Weight	4.4 lbs. (2.2 Kg)

Specifications and design subject to change without prior notice for improvement purposes

CX-22SW specifications

The Nady Systems CX-22SW is a versatile and advanced wireless microphone system designed for performers, speakers, and educational settings. Renowned for its reliable performance and user-friendly features, the CX-22SW integrates cutting-edge technology to deliver high-quality sound and ease of use.

One of the standout features of the CX-22SW is its dual-channel design, allowing users to operate two separate wireless microphones simultaneously. This is particularly beneficial for duets, panel discussions, or instructional settings where multiple speakers are present. The system operates in the UHF frequency band, providing a robust transmission range that minimizes interference and ensures a clear audio signal.

The CX-22SW utilizes a sophisticated True Diversity technology, which significantly enhances the reliability of the wireless connection. By employing two separate receiver antennas, it constantly switches between the best signal, effectively reducing dropouts and improving audio quality. This technology is further supported by a built-in compandor for dynamic range enhancement, which results in crystal-clear audio reproduction, even at varying distances from the receiver.

In terms of usability, the Nady CX-22SW features easy-to-read LCD displays on both the receiver and the transmitters, showing vital information such as battery status, frequency selection, and audio levels. The system includes adjustable gain controls, allowing users to tailor the output to their specific requirements. Additionally, the CX-22SW supports a wide frequency response range, making it ideal for vocals, instruments, or ambient sounds.

Durability is another key characteristic of the CX-22SW, as both the receiver and transmitters are built with robust materials designed to withstand rigorous use. The handheld microphone transmitter is equipped with a dynamic capsule, ensuring it performs well in live sound situations. The system offers a wide dynamic range and low noise floor, allowing for professional-grade sound quality.

Moreover, the CX-22SW is user-friendly, featuring plug-and-play installation, making it accessible even for those new to wireless audio systems. It comes with interchangeable frequency options, allowing users to select from a range of channels to avoid congestion in crowded environments.

Overall, the Nady Systems CX-22SW is an excellent choice for anyone in need of a reliable, high-quality wireless microphone system. Its combination of advanced technologies, user-friendly features, and durability makes it suitable for a variety of applications, ensuring that it meets the demands of both amateur and professional users alike.