Desa TTC12B owner manual Table of Contents, Safety Information, Connecting Heater to Propane Tank

Page 2

TABLE OF CONTENTS

Safety Information

2

Replacement Parts

5

Connecting Heater To Propane Tank

2

Parts List

5

Lighting Heater

3

Heater Information

5

To Turn Off Heater

4

Warranty Information

6

Maintenance

4

 

 

SAFETY INFORMATION

Read and understand this manual before using this heater. Improper use of this heater can cause serious injury. Do not allow anyone who has not read this manual to operate this heater. Keep this manual for reference. It is your guide to safe and proper operation of this heater.

1.For outdoor use only. Do not use inside house, camper, tent, vehicle, or any type of unvented or enclosed area.

2.Use heater in areas free from open flames, combustible vapors, and dust.

3.Never operate heater while sleeping or unat- tended.

4.Minimum heater clearances from combus- tibles: Top, Front, and Sides: 3 ft (1 m)

5.This heater consumes air. Provide a fresh air opening of at least 12 inches2 (77 cm2).

6.Use only propane gas set up for vapor with- drawal.

7.The LP gas cylinder must be constructed and marked in accordance with the specifications for the LP gas cylinders of the US Depart- ment of Transportation (DOT) or Transport Canada.

8.Before each use, check heater for leaks. Never use an open flame to check for a leak. Apply a mixture of liquid soap and water to all joints. Bubbles forming show a leak. Correct all leaks at once.

9.Locate propane tank on a stable and level surface. The heater burner must be at least 24" (0.61 m) above the floor. Always attach heater to propane tank in an upright position. Never operate heater on its side or attach to propane tank in a horizontal position. This could lead to dangerous flare-ups or fire.

10.Keep children and animals away from heater.

11.Do not use heater below ground level. Propane is heavier than air. If a leak occurs, propane gas will sink to the lowest possible level. If you smell gas or suspect a leak, shut off the propane tank valve at once and ventilate the

area. Do not strike a match or create any flame or electric spark. Find and correct the leak before attempting to light any appliance. If you cannot correct leak, do not tamper with heater. Return heater to nearest authorized service center or to address on back page of this manual, freight prepaid.

12.Do not move or handle a hot or operating heater. Do not attach or remove a hot or op- erating heater from the propane tank. Severe burns may result.

13.Storage of heater is permissible only if the cylinder is disconnected and removed from heater.

14.Always remove heater from propane tank after each use. Always store propane tank outdoors in a well ventilated space out of the reach of children. Never store propane tank in a build- ing, garage, or any other enclosed area. Never store propane tank near high heat, open flame, or where temperatures exceed 100° F (38° C).

15.For use with 20 lb. propane cylinders or larger.

CONNECTING HEATER TO

PROPANE TANK

Read and understand all safety information before connecting heater to propane tank.

WARNING: Make sure there is no open flame in the area.

1.Make sure heater regulator knob is in the “OFF” position.

2.Keep all connections and fittings clean. Make sure the propane tank valve outlet is clean. Check the rubber “O” ring on the heater inlet fuel connector for damage before each use. Replace if worn or damaged.

3.Wrench tighten the fuel connector nut into the propane tank valve (see Figure 1, page 3). Turn fuel connector nut counterclockwise to tighten. Threads are left-handed.

2

www.desatech.com

101835-01D

Image 2
Contents Carbon Monoxide Hazard Models CHD12B and TTC12BConnecting Heater to Propane Tank Table of ContentsSafety Information Lighting Heater Open propane tank valve on propane tank slowlyTo Turn OFF Heater MaintenanceHave heater inspected yearly by a qualified service agency Tightly close propane tank valve by turning clockwiseParts Under Warranty Replacement PartsParts List Parts not Under WarrantyWarranty Information Propane Infra-Red Camp Heater Limited WarrantyModéles CHD12B ET TTC12B AVERTISSE- MentTable DES Matières Informations SUR LA SécuritéBranchement DE L’APPAREIL DE Chauffage À Ouvrir en grand le robinet de la bouteille de propaneAllumage DE L’APPAREIL DE Chauffage Suite EntretienRenseignements SUR ’APPAREIL DE Chauffage Pièces DétachéesListe DES Pièces Pièces Sous GarantieRenseignements SUR LA Garantie

TTC12B specifications

Desa TTC12B is a state-of-the-art temperature control system specifically designed for efficient thermal management in various industrial applications. This model is recognized for its innovative features and advanced technologies that significantly enhance operational efficiency and user convenience.

One of the standout features of the Desa TTC12B is its integrated temperature control mechanism, which allows for real-time monitoring and adjustment of temperature settings. This precision ensures that environments remain within optimal temperature ranges, thus preventing fluctuations that can lead to material degradation or operational inefficiencies.

The TTC12B employs cutting-edge sensors that guarantee accurate temperature readings. These sensors are designed to withstand harsh industrial environments, ensuring reliability and longevity. The data gathered from these sensors can be communicated to a central control unit, facilitating seamless integrations with broader automation systems and enabling real-time feedback.

Another significant aspect of the Desa TTC12B is its energy efficiency. The system utilizes advanced algorithms to optimize power consumption, reducing operational costs while promoting sustainability. This not only helps in minimizing the carbon footprint but also aligns with modern environmental standards that many industries are striving to meet.

Furthermore, the Desa TTC12B is designed with user-friendliness in mind. Its intuitive interface makes it easy for operators to set preferences and monitor system performance without extensive training. Additionally, the system supports remote control capabilities, allowing users to manage settings from any location via integrated mobile or web applications.

Durability is also a core characteristic of the TTC12B. Constructed from high-quality materials that can withstand extreme temperatures and pressures, this model is built to endure the demands of industrial use over sustained periods. Its robust design minimizes maintenance needs and downtime, ensuring that production schedules are met without interruption.

In conclusion, Desa TTC12B stands out in the field of temperature control systems. Its blend of advanced technology, energy efficiency, user-centric design, and durability makes it an excellent choice for industries demanding precise temperature management. By investing in Desa TTC12B, companies can expect not only optimized operational efficiency but also substantial long-term cost savings and enhanced environmental compliance.