Nady Systems CX-2314 Operation, Description, CD Boost, LOW/ MID/ High Phase Inversion Switch, Xlr

Page 6

OPERATION

CAUTION

The following must be observed to prevent malfunctioning and/or possible equipment damage.

1.Before plugging the unit into the main AC line, make sure that all of the equipment following the crossover output lines is turned off or all of the inputs are turned down.

2.The unit should be plugged in only when it has been established that the AC line is supplying the correct voltage and frequency.

3.Never change the frequency range switch from the x10 to x1 position (or vice versa) with the crossover output levels passing signal. Transients can result and speaker damage is possible.

DESCRIPTION

The CX-2314 are Linkwitz-Riley electronic crossovers. This unit can be used in either of two operation modes, as shown below.

STEREO 3-WAY • MONO 4-WAY

All inputs and outputs are floating and balanced when connected to other floating and balanced equipment. Any combination of bal- anced and unbalanced operation is permitted. Stereo and mono modes can be easily selected via switch and connecting inputs and outputs property with no patch cords required.

CD BOOST

The constant directivity horn equalization circuit is to be used with horns that require a high frequency boost. Consult your horn manu- facturer to determine whether it is needed in your circumstance. The provided boost is +3 db @3.5kHz rising 6db per octave to 22.5kHz. No changes need to be made to operate without the constant directivity boost. If the constant directivity equalization circuit is desired on a particular channel then depress the corresponding switch labeled "CD BOOST". There is one switch for each chan- nel located by that channel's input jack. If two or more channels are ganged together, then only use the switch closest to theused input jack. The switches closest to the unused input jacks have no effect on the circuit when ganged.

PEAK (CLIP) LEDs (LOW, MID, HIGH)

These LEDs will light when the output capability is being exceeded, resulting in clipping distortion. Occasional flickering of the Clip LEDs is acceptable, but if one or more remains on continuously you should turn down the level control or reduce the output level of the preceding component to avoid audible distortion.

LOW/ MID/ HIGH PHASE INVERSION SWITCH

These switches invert the phase between the speakers. Use them when you hear a bad sound continuity between the LOW,MID and HIGH ranges.

XLR Connector Wiring

XLR

Female input connector shown. Wiring scheme same for male output connector.

2

1

1

2

 

3

Ground (Screen)

3

 

 

 

 

Cold (-)

 

 

 

(Out of Phase Signal)

 

 

 

Hot (+)

 

 

 

(In Phase Signal)

 

Socket (female)

Plug (male)

7

Image 6
Contents Crossover Features ContentsImportant Safety Instructions Controls A N N E LRear Panel 3-Way Stereo / 4-Way Mono Active Crossover Description LOW/ MID/ High Phase Inversion SwitchOperation CD BoostPage Specifications Constant-Directivity CorrectionPage Service for Your Nady Audio Product

CX-2314 specifications

Nady Systems CX-2314 is a versatile and high-quality audio mixer designed to meet the demands of both professional and amateur sound engineers. Engineered by Nady Systems, a respected name in audio products, the CX-2314 incorporates advanced technologies to provide exceptional audio performance and reliability.

One of the main features of the CX-2314 is its robust configuration as a 14-channel mixer. This layout allows for the simultaneous mixing of various audio sources, including microphones, instruments, and line-level devices. Each channel is equipped with dedicated equalization controls, allowing users to fine-tune frequencies to achieve the desired sound quality. The CX-2314 provides both XLR and 1/4-inch inputs, accommodating a wide range of audio equipment.

The mixer is designed with user-friendly controls, making it suitable for performers and engineers alike. The intuitive layout of the control surface ensures ease of access to each channel’s faders, equalizers, and auxiliary sends. This design enhances the mixing experience and allows for quick adjustments during live performances or studio recordings.

One notable technology integrated into the CX-2314 is its low-noise circuitry. This advanced design minimizes unwanted noise and interference, resulting in cleaner audio output. The mixer also features built-in effects, offering reverb and delay options that can add depth to vocal and instrumental performances. This versatility makes it suitable for various applications, from live events to studio recordings.

The CX-2314 has an impressive signal-to-noise ratio, ensuring that the audio remains clear and free from distortion even at high volume levels. Additionally, it supports phantom power for condenser microphones, broadening the range of microphones that can be used with the unit.

Another characteristic of the CX-2314 is its rugged construction, designed for durability on the road. The mixer is housed in a heavy-duty chassis, providing protection against wear and tear as well as unexpected impacts. This ensures reliable performance in a variety of environments, making it a great choice for touring musicians, sound engineers, and recording studios.

In conclusion, the Nady Systems CX-2314 is a powerful audio mixer that combines advanced technology, user-friendly design, and robust construction. Its features make it an excellent choice for anyone seeking high-quality sound mixing capabilities for both live performances and studio applications.