Troubleshooting, Problem Solution | Samsung VCC8790H4A/XEU instruction

troubleshooting

	PROBLEM	SOLUTION

	Motor does not start	• Check cable, pulg and socket.
	Motor does not start	• Leave to cool.
		• Leave to cool.

	Suction force is gradually	• Check for blockage and remove.
	decreasing	• Check for blockage and remove.
	decreasing

	Cord does not rewind fully	• Pull the cord out 2-3m and push down the cord rewind button.

	Vacuum cleaner does	• Check hose and replace if required.
	not pick up dirt	• Check hose and replace if required.
	not pick up dirt

	Low or decreasing suction	• Please check filter and, if required, clean as illustrated in the
	Low or decreasing suction	instructions. if filters are out of condition change them to new ones.

Body overheating

• Please check filters, If required clean as illustrated in the instruction.

Static electicity discharge

• Please decrease power suction.

This Vacuum cleaner is approved the following.

EMC Directive : 2004/108/EEC

Low Voltage Directive : 2006/95/EC

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.

Code No. DJ68-00467A REV(0.0)