Desa TC25 Product Identification, Unpacking, Theory of Operation, Propane Supply, Ventilation

Page 3

PRODUCT IDENTIFICATION UNPACKING THEORY OF OPERATION PROPANE SUPPLY VENTILATION

3

PRODUCT IDENTIFICATION

Top

Shell

Hose/Regulator/ Fuel Gas

connectorBase Assembly

Piezo Ignitor Button

Gas Inlet

Automatic Control

Connector

Valve Button

 

Figure 1 - Product Identification

UNPACKING

1.Remove all packing items applied to heater for shipment. Keep plastic cover caps (attached to inlet connector and hose/regu- lator assembly) for storage.

2.Remove all items from carton.

3.Check all items for shipping damage. If heater is damaged, promptly inform dealer where you bought heater.

THEORY OF OPERATION

The Fuel System: The hose/regulator assembly attaches to the propane gas supply. This provides fuel to the heater.

The Ignition System: The piezo ignitor lights the burner.

The Automatic Control System: This system causes the heater to shut down if the flame goes out.

NOTICE: Because of the metal lubricant used in this product, you may notice some smoking upon initial startup and shut down. This condition is normal and should not occur beyond the first several (5-10) minutes of operation. If you have questions, please call 1-866-672-6040.

PROPANE SUPPLY

Propane gas and propane tank(s) are to be furnished by the user.

Use this heater only with a propane vapor withdrawal supply system. See Chapter 5 of the Standard for Storage and Handling of Liquefied Petroleum Gas, ANSI/NFPA 58. Your local library or fire department will have this booklet.

The amount of propane gas ready for use from propane tanks varies. Two factors decide this amount:

1.The amount of propane gas in tank(s)

2.The temperature of tank(s)

This heater is designed to operate with a minimum 20 lb. (9 kg) tank. You may need two or more tanks or one larger tank in colder weather. Use a 100 lb. (45 kg) tank for longer operation or in very cold weather. Less gas is vaporized at lower temperatures. Your local propane gas dealer will help you select the proper supply system.

Temperature °F (°C)

Number of tanks,

at Tank Location

100 pound (45 kg)

40° (4°)

1

32° (0°)

1

20° (-6.7°)

1

10° (-12°)

1

(-18°)

1

-10° (-23°)

2

-20° (-29°)

2

VENTILATION

WARNING: Provide at least an 120-square-inch (774.2 cm2) opening of fresh, outside air while running heater. If proper fresh, outside air ventilation is not provided, carbon monoxide poisoning can occur. Pro- vide proper fresh, outside air ventilation before run- ning heater.

For more information, visit www.desatech.com

101857-01H

Image 3
Contents Propane Construction Convection Heater Table of ContentsTo prevent injury, wear gloves when handling heater Safety InformationPropane Supply Product IdentificationUnpacking Theory of OperationTo Restart Heater InstallationoperationTo Start Heater To Stop HeaterTechnical Service Storage Replacement PartsMaintenance SpecificationsInspecting Burner TroubleshootingOwners Registration Form Postage Required Model TC25 Illustrated Parts Breakdown and Parts ListWarranty Service Warranty and Repair Service