Hob Use (continued) | GB |
A buzzer will sound for 2 minutes to indicate that the timer is no longer active. To deactivate it press any key.
To know the residual time for each zone, press the key B of the interested zone. To set at zero the timer select the zone and press the E key contemporaneously with the keys + and
Caution!
While the hob is in operation the timer display remains on, with its value set to "00".
IMPORTANT: To prevent damage being inflicted on the electronic circuits, the hob is fitted with an overheating safety system.In situations where the appliance is used at high power levels for a prolonged period of time, the hob may switchoff one or more of the activated zones temporarily, until the temperatures return to the set levels.On the display corresponding to the cooking zone which has been temporarily switched off, the power level (e.g.8) will be shown in alternation with a H E 2.This will stop flashing once the cooking zone has been reactivated.
Minute - Minder Function:
-Unblock the cooking surface by keeping the “key button” pressed down for 3 seconds until the “indicator light button” is switched off.
-Press the “Timer” (E) button until the writing “00”
(G)appears on the display.
-Press + or - to select the number of the minutes.
-Press the “Timer” button to confirm the selection.At the end of the set time, an acoustic signal will be activated.
Heat Up Function:
The function heat up allows to set the maximum temperature for a limited period of time on the cooking zone, then the temperature decreases down to the selected value.
-To activate the Heat up function, select the cooking zone, set at 9 the temperature level, press again the key "+" the letter A will appear on the display then with the
Low Temp Function:
With this function, the temperature of the cooking zone remains constant to 70°.
-To activate this function select the desired zone, set at 1 the temperature level, press again the key
�
�
TW966
Fig.11
- 27 -