Samsung LP08IPLSBTZEN, LP10IPLSBTZEN, LP08IPLEBTZEN manual Contents

Frame Manager user manual

You can use this product as an auxiliary monitor as well as a monitor to view photos.

This feature enables you to work more efficiently than that with single monitor. For this purpose, install an additional Frame Manager program and connect the USB cable supplied with the product to a PC. (Only one auxiliary monitor is supported.)

Contents

–– System Requirements

–– Precautions

–– Installation

–– Changing the Digital Photo Frame Mode on the PC

–– Rotating the Screen of the Mini Monitor

–– Adjusting the Brightness of the Mini Monitor

–– System Requirements

O S : Windows XP SP2, Vista

USB : USB 2.0 Host Controller

RAM : 256 MB or above

CPU : 2.4 GHz or greater

–– Precautions

1Do not use your Mini-Monitor as a primary monitor.

If it is used as a primary monitor, the screen may be blank.

2Make sure to use the provided USB cable.

3Move the programs displayed and used on the Mini-Monitor to the primary monitor after you have finished using it.

4For some video cards, the Mini-Monitor may not operate normally. In this case, set Hardware acceleration to None.

To set Hardware acceleration to None

:Right-click on the Windows Desktop and select Properties from the displayed menu. The Display Properties window appears. Click Settings > Advanced > Troubleshoot tab. Move the Hardware acceleration slide to None.

5The Aero 3D effect of Windows Vista is disabled when the Mini-Monitor is used.

6Some videos may only be played normally by Windows Media Player.

7If the video card’s driver is updated while Frame Manager is already installed, the Mini- Monitor function may not operate properly.

In this case, remove Frame Manager and install it again.

8If the rotation function of Frame Manager is used, the current location setting of Mini- Monitor may be changed. Even if the rotation function is used, the screen will not be shown to be rotat- ing in the [Display Properties] window.

9Some videos may not play on the mini monitor with Windows Vista.

10The digital photo frame cannot be used at the same time as the Windows Presentation Foundation function.

11If Frame Manager cannot be started after it is installed, remove the installed program, restart the PC, and installed the program again. Note that the digital photo frame must be disconnected from the PC during installation.