Nady Systems XA-300 owner manual Front & Rear Connections, Front Panel

Page 5

FRONT & REAR CONNECTIONS

6

4

3

2 5

FRONT PANEL

1

1. POWER SWITCH

To turn the unit ON or OFF, press the upper or lower portion of this button. Before turning on the amplifier, check all connections and turn down the level controls. A momentary muting is normal when turning the amplifier on or off.

(Caution: Always turn on your power amplifier last, after all your other connected equipment, and always turn off your power amplifier before your other connected equipment.)

2. POWER LED INDICATOR

This LED illuminates when the power is turned “ON”.

3. CLIP (PEAK) LED INDICATORS

These LEDs illuminate if any section of the power amplifier’s output are within 3dB of clipping. Occasional blinking of the LEDs are acceptable, but if they remain on more than occasionally you should turn down either the power amplifier’s level controls or reduce the output level of the preceding component to avoid audible distortion or hard clipping.

(Note: Operating the amplifier at hard clipping can result in overheating or may damage your amplifier over a period of time. Amplifiers that are damaged due to such user neglect, or improper operation, are not covered under warranty.)

4. SIGNAL LED INDICATORS

These LEDs illuminate to confirm the presence of an input signal greater than 100 mV at that channel of the amplifier

5. PROTECT LED INDICATOR

This LED illuminates if the power amplifier’s output connection is shorted or the load impedance is too low. When the LED is lit, turn OFF the power and check the output’s connection to verify that it is correct, then turn ON the power again.

6. LEVEL CONTROLS

These control the level of signal coming into each channel. The actual voltage gain of the amplifier is shown in dB. Turn these controls counterclockwise if the peak LEDs illuminate steadily (indicating too strong an input signal).

BACK PANEL

13

7

11

12

10

9 8

7.POWER CONNECTOR

The cord connector is used to connect the AC power source to your power amplifier.

(CAUTION: DO NOT REMOVE THE CENTER GROUNDING PIN.)

8.FUSE

If this fuse blows continuously, shut off the unit and have it

serviced by qualified service technician. 115V AC ~6A 250V FB; 230V AC ~4A 250V FB

9.AC VOLTAGE SELECTOR SWITCH

Before plugging in the power cord, check to see that the unit is set for the proper voltage for your area: ~115V (60Hz) or ~230V (50Hz). A cover plate is provided to ensure that this switch is not accidently reset or tampered with between uses.

5

Image 5
Contents Mplifier Page Table of Contents FeaturesImportant Safety Instructions Front Panel Front & Rear ConnectionsInspection InstallationConnections Stereo Two-Channel ModeParallel Mono Mode Block Diagram Power Specifications SpecificationsPage Service for Your Nady Audio Product

XA-300 specifications

Nady Systems XA-300 is a versatile and innovative piece of audio equipment designed for both professional and amateur users. This device is widely recognized for its exceptional sound quality, reliability, and a range of features that cater to various audio needs.

One of the standout features of the XA-300 is its wireless technology, which utilizes UHF frequencies to deliver clear and uninterrupted audio signals. This ensures minimal interference, making it ideal for applications such as live performances, presentations, and public speaking events. With a range of up to 300 feet, performers can move freely without the constraints of cables.

The XA-300 comes equipped with a dual-channel receiver, allowing users to operate two microphones simultaneously. This feature is particularly beneficial for collaborative performances, interviews, or any scenario where multiple speakers need to be heard clearly. Each channel can be independently adjusted for volume, enabling precise control over the audio output.

In terms of microphone options, the XA-300 supports both handheld and lavalier microphones. The handheld microphone is designed for ease of use during performances, while the lavalier option provides discreet audio capture for presenters and speakers who prefer a more subtle approach. Both types of microphones feature Nady's advanced audio technology, which enhances clarity and reduces background noise.

Another technological highlight of the XA-300 is its built-in DSP (Digital Signal Processing). This technology enables users to customize audio settings, applying effects such as reverb and echo, thereby enhancing the overall sound experience. This feature is invaluable for musicians and performers who want to add depth and professionalism to their audio output.

The XA-300 also boasts rugged construction, making it suitable for both indoor and outdoor use. Its durable casing ensures that the equipment can withstand the rigors of touring and travel. Additionally, the device is designed with user-friendliness in mind, featuring an intuitive interface that allows for quick and easy setup.

The device operates on AA batteries, providing long-lasting power, and can also be connected to external power sources for extended use. Furthermore, the XA-300 includes LED indicators for battery life and signal strength, ensuring that users are always aware of their equipment's status.

In summary, the Nady Systems XA-300 is a powerful and flexible audio solution that combines advanced technology with practical features. Its wireless capabilities, dual-channel operation, and durable design make it a preferred choice for musicians, speakers, and audio professionals alike. Whether used in a small venue or a large auditorium, the XA-300 delivers exceptional performance and reliability.