Desa BLP375A, RLP375A owner manual Storage, Maintenance, To Stop Heater, To Restart Heater

Page 6

375,000 BTU/HR - A SERIES

PROPANE CONSTRUCTION HEATER

OPERATION

Continued

TO STOP HEATER

1.Tightly close propane supply valve on propane tank(s).

2.Wait a few seconds. Heater will burn gas left in supply hoses.

3.Turn on/off switch to the OFF position.

4.Unplug heater.

TO RESTART HEATER

If safety control stops gas flow to heater, motor will continue to run.

To restart heater:

1.Turn on/off switch to the OFF position.

2.Wait ten seconds, then turn on/off switch to the ON position.

If heater does not restart

Check manual valves (if any) and sup- ply valves (on propane tank). Make sure they are open.

Check fuel level in propane tank(s). If fuel level is too low, contact local pro- pane gas company.

If heater still does not restart, contact your local service center.

STORAGE

CAUTION: Disconnect heater from propane supply tank(s).

1.Store propane tank(s) in safe manner. See Chapter 5 of Standard for Storage and Handling of Liquefied Petroleum Gases, ANSI/NFPA 58 and the Propane Installation Code CAN/CGA B149.2. Follow all local codes.

2.Place plastic cover caps over brass fit- tings on inlet connector and hose/regu- lator assembly.

3.Store in dry, clean, and safe place. Do not store hose/regulator assembly in- side heater combustion chamber.

4.When taking heater out of storage, al- ways check inside of heater. Insects and small animals may place foreign objects in heater. Keep inside of heater free from combustible and foreign objects.

MAINTENANCE

WARNING: Never service heater while it is plugged in, con- nected to propane supply, oper- ating, or hot. Severe burns and electrical shock can occur.

1.Keep heater clean. Clean heater annu- ally or as needed to remove dust and debris. If heater is dirty or dusty, clean heater with a damp cloth.

2.Inspect heater before each use. Check connections for leaks. Apply mixture of liquid soap and water to connections. Bubbles forming show a leak. Correct all leaks at once.

3.Inspect hose/regulator assembly before each use. If hose is highly worn or cut, replace.

4.Have heater inspected yearly by a quali- fied service agency.

5.Keep inside of heater free from com- bustible and foreign objects.

6

100416

Image 6
Contents Propane Construction Heaters Safety Information Propane Construction HeaterProduct Identification Unpacking 375,000 Btu/Hr ModelsTheory of Operation Propane Supply VentilationInstallation OperationTo Start Heater To Stop Heater MaintenanceStorage To Restart HeaterService Procedure Cleaning FANWiring Diagrams Wiring DiagramAccessories SpecificationsReplacement Parts Technical ServiceIllustrated Parts Breakdown BLP375A RLP375AParts List KEY Part Number Description QTYWarranty and Repair Service

BLP375A, RLP375A specifications

Desa RLP375A and BLP375A represent a significant advancement in the category of portable heating solutions. These models, designed to cater to both residential and commercial needs, merge efficiency with practicality, making them standout options for consumers seeking reliable heating.

Both units feature a sleek, modern design that allows for versatile placement in various settings, whether it be a workshop, garage, or living area. The RLP375A is known for its radiant heating technology, which facilitates consistent warmth by emitting infrared heat. This method is particularly effective in spaces with high ceilings or larger areas, as it directly heats objects and people rather than merely warming the air.

On the other hand, the BLP375A is equipped with a blower fan that circulates warm air throughout a room. This forced-air system enhances the distribution of heat, ensuring that even larger areas are warmed quickly and efficiently. The combination of these technologies allows both models to operate with impressive energy efficiency, significantly reducing heating costs while maintaining comfortable room temperatures.

One of the primary characteristics of the RLP375A and BLP375A is their user-friendly control systems. These models often come with adjustable thermostats, allowing users to set their desired temperature easily. Moreover, they include safety features such as overheat protection and tip-over switches which automatically shut the units down in unsafe situations, providing peace of mind to consumers.

Durability is another hallmark of these heating units. Built with high-quality materials, they are designed to withstand regular use and adverse conditions, making them suitable for both indoor and outdoor environments. The portability of these units is enhanced by their lightweight design and integrated handles, facilitating easy movement from one location to another.

In terms of energy consumption, both the RLP375A and BLP375A are engineered to provide maximum heating output with minimal energy usage, conforming to stringent environmental standards to promote sustainability. Additionally, their quiet operation means they are ideal for use in noise-sensitive environments.

Customers looking for dependable, efficient, and safe heating solutions will find Desa's RLP375A and BLP375A models to be excellent choices, reflecting the brand's commitment to quality and innovation in heating technology.