Controls and Connections, Mono Input Section

CONTROLS AND CONNECTIONS

	1. MONO INPUT SECTION
	(1) MIC INPUT
	The Mic input is an electronically balanced XLR type designed to
(1)	accept signals from any balanced low impedance (Low Z)
(1)	microphone. To accommodate condenser microphones, this input
	is also equipped with +48VDC phantom power globally switchable
	to all XLR input jacks with the Phantom Power switch (22) on
	the front panel. Dynamic or ribbon-type microphones do not
	require phantom powering. It will be necessary to adjust the
	channel gain with the input Trim control (3) to achieve a nominal
(2)	operating level. The XLR jack is configured for: Pin1 = ground,
	Pin2 = positive (+), Pin3 = negative (-).

(4)

[Note: The Mic inputs are more sensitive than the Line inputs.

(3)Also, do not connect mics with the power switched on, as indicated by the Phantom Power On LED (25) in the Master

Section of the front panel. Never use unbalanced mic cables with the Phantom Power switched on. Never short the +48VDC to ground, as that can cause serious damage to your mixer. Also, mute the Monitor/PA speakers when turning the phantom power on or off.]

(2) LINE INPUT

The Line input is designed to accept balanced or unbalanced line- level signals such as those from keyboards, drum machines, or samplers. There is enough gain available on the line input to accept even lower level signals, such as those from an unbalanced microphone or guitar output. Use the Trim control (3) to adjust for the desired level. If a balanced signal is to be connected to the line input, then a 1/4" TRS (stereo) phone plug should be wired for: Tip = positive (+), Ring = negative (-), Sleeve = ground.

(5)		(Note: Only either the Mic or the Line input of a given channel can
		be connected at one time. Never connect both simultaneously to

		the same channel.)
		(3) TRIM CONTROL
(6)	(7)	The trim control adjusts the input sensitivity (channel gain) of the
		mic and line inputs on the mono input channels. This control can


		be adjusted to accommodate input signals from a wide variety of
		sources, from the high outputs from keyboards or drum machines


		to the small signal outputs of microphones. This wide range
		eliminates the need for Mic/Line switching. The best balance of


(8)		S/N and dynamic range will be achieved if you adjust the TRIM
		control on each channel separately so that the Peak Indicator


		LED (7) for that channel lights occasionally.

MXE-612 specifications

The Nady Systems MXE-612 is a powerful and versatile audio mixer designed to meet the demands of both professional and amateur audio applications. Known for its reliability and excellent sound quality, the MXE-612 has become a popular choice for live sound reinforcement, studio recording, and multimedia presentations.

One of the key features of the MXE-612 is its six input channels. Each channel provides a combination of XLR and 1/4" TRS inputs, allowing for the connection of various audio sources, including microphones, instruments, and other audio devices. This flexibility makes it easy to integrate the mixer into a wide range of setups. The preamps in the MXE-612 are designed to deliver low noise and high headroom, ensuring that audio signals are captured with clarity and precision.

Another standout characteristic of the MXE-612 is its built-in effects processor. The mixer includes multiple effects such as reverb, delay, and chorus, which can be applied to individual channels or the overall mix. This feature enhances the audio experience, allowing users to add depth and dimension to their sound. The intuitive interface of the effects processor makes it easy to dial in the desired settings quickly.

The MXE-612 also features a 3-band EQ on each channel, providing users with the ability to sculpt their sound. The EQ allows for precise adjustments of bass, midrange, and treble frequencies, offering full control over the tonal balance of each input. Additionally, the master section of the mixer includes a 9-band graphic equalizer, which further enhances the overall sound shaping capabilities.

Connectivity is another strong point of the MXE-612. It comes equipped with XLR outputs for professional audio connections, as well as auxiliary send and return capabilities for external processors or monitors. This makes the mixer suitable for a variety of applications, including live performances and studio work.

Overall, the Nady Systems MXE-612 is a reliable and feature-rich audio mixer that offers exceptional sound quality and versatility. Its combination of multiple input options, built-in effects, comprehensive EQ controls, and robust connectivity makes it an ideal choice for musicians, sound engineers, and content creators looking for a professional-grade mixer that can handle any audio task with ease. As audio technology continues to evolve, the MXE-612 stands out as a practical solution for today's audio mixing needs.