Desa SBLP155AT owner manual Propane Supply, Installation

Page 4

4

PROPANE SUPPLY INSTALLATION

PROPANE SUPPLY

Propane gas and propane tank(s) are to be furnished by the user.

Use this heater only with a propane vapor withdrawal supply system. See Chapter 5 of the Standard for Storage and Handling of Liquefied Petroleum Gas, ANSI/NFPA 58. Your local library or fire department will have this booklet.

The amount of propane gas ready for use from propane tanks varies. Two factors decide this amount:

1.The amount of propane gas in tank(s)

2.The temperature of tank(s)

The chart below shows the number of 100 pound tanks needed to run this heater.

Do not operate this product with any tank smaller than 100 pounds.

Temperature (°F)

Number of tanks

at tank location

(150,000 Btu/Hr)

32

2

20

2

10

3

0

3

-10

(Use larger

-20

tank)

Less gas is vaporized at lower temperatures. You may need two or more 100 pound tanks or one larger tank in colder weather. Your local propane gas dealer will help you select the proper supply system. The minimum surrounding-air temperature rating for each heater is -20°F (-29°C).

INSTALLATION

3.Connect hose to inlet connector. Tighten firmly using a wrench.

IMPORTANT: Extra hose or piping may be used if needed. Install extra hose or piping between hose/regulator assembly and propane tank. You must use the regulator supplied with heater.

4.Open propane supply valve on propane tank(s) slowly. Note: If not opened slowly, excess-flow check valve on propane tank may stop gas flow. If this happens, close pro- pane supply valve and open again slowly.

5.Check all connections for leaks.

WARNING: Never use an open flame to check for a leak. Apply a mixture of liquid soap and water to all joints. Bubbles forming show a leak. Correct all leaks at once.

6.Close propane supply valve.

Hose

Regulator

Supply

Valve

Vent

(pointing down)

Propane

Tank

POL Fitting

Figure 3 - Regulator With Vent Pointing Down

WARNING: Review and understand the warnings in the Safety Information section, page 2. They are needed to safely operate this heater. Follow all local codes when using this heater.

WARNING: Test all gas piping and connections for leaks after installing or servicing. Never use an open flame to check for a leak. Apply a mixture of liquid soap and water to all joints. Bubbles forming show a leak. Correct all leaks at once.

1.Provide propane supply system (see Propane Supply, above).

2.Connect POL fitting on hose/regulator assembly to propane tank(s). Turn POL fitting counterclockwise into threads on tank. Tighten firmly using wrench. Tighten regulator with vent pointing down.

Hose

Inlet Connector

Figure 4 - Hose and Inlet Connector

For morevisit www..com

103014-01L

Image 4
Contents Table of Contents Models BLP155AT SBLP155ATSafety Information Unpacking Product IdentificationTheory of Operation Installation Propane SupplyMaintenance VentilationOperation StorageService Procedures Upper Shell RemovalFAN IgnitorSpecifications Wiring Diagrams Electrical Ladder DiagramIllustrated Parts Breakdown Models BLP155AT SBLP155ATParts List KEY Part Number Description QTYAccessories Replacement Parts Technical ServiceParts Under Warranty Parts not Under WarrantyOwners Registration Form Postage Required PROPANE/LP Forced AIR Heaters PROPANE/LP Convection Heaters GAS ChimeneasWarranty and Repair Service

SBLP155AT specifications

Desa SBLP155AT represents a remarkable advancement in the realm of smart home technology and energy efficiency. This innovative product combines modern design with cutting-edge features to enhance the living experience of its users, making it a sought-after solution in contemporary homes.

At its core, the SBLP155AT is designed for optimal energy management. It utilizes advanced energy-saving technologies that contribute to reducing overall consumption while ensuring maximum comfort for occupants. With smart sensors integrated into the system, the device can monitor energy usage in real-time, providing users with valuable insights and helping them make informed decisions about their energy habits.

One of the standout features of the SBLP155AT is its seamless connectivity. Equipped with Wi-Fi capabilities, it allows users to control the device remotely via a dedicated mobile application. This means that homeowners can adjust settings, monitor energy consumption, and receive notifications even when they are away from home. The convenience of having remote access makes it easier to manage energy usage efficiently.

Additionally, the SBLP155AT is compatible with various smart home ecosystems, such as Amazon Alexa and Google Assistant. This compatibility ensures that users can integrate the device into their existing systems effortlessly, enabling voice-activated control and automating routines that simplify daily tasks.

The design of the SBLP155AT is both sleek and functional, making it an elegant addition to any space. Its compact size allows for easy installation in different areas, while the user-friendly interface ensures that anyone can operate it without difficulty.

Safety is also a top priority in the design of the SBLP155AT. It incorporates multiple layers of protection, including over-current, over-voltage, and temperature controls, ensuring both device longevity and user safety. This focus on safety aligns with the product’s overall commitment to providing a reliable and efficient energy management solution.

Furthermore, the SBLP155AT is built with sustainability in mind. Its energy-efficient operation not only benefits the user’s monthly bills but also contributes to a reduced carbon footprint. By promoting energy conservation in everyday life, this device helps align users with a more environmentally friendly lifestyle.

In conclusion, the Desa SBLP155AT stands out as a leading solution in smart home technology. Its combination of energy management, connectivity, user-friendly design, safety features, and sustainability makes it an ideal choice for modern homeowners seeking to enhance their living space while reducing their environmental impact.