Desa VFRMV24NA, VFRMV18NA, VFRMV18PA installation manual Pilot Flame Pattern, Burner Flame Pattern

Page 17

INSPECTING BURNERS

Check pilot fl ame pattern and burner fl ame patterns often.

PILOT FLAME PATTERN

Figure 22 shows a correct pilot fl ame pattern. Figure 23 shows an incorrect pilot fl ame pattern. The incorrect pilot fl ame is not touching the thermocouple. This will cause the thermocouple to cool. When the thermocouple cools, the heater will shut down.

If pilot fl ame pattern is incorrect, as shown in Figure 23

turn heater off (see To Turn Off Gas to Appliance, page 15 (Remote- Ready Models])

see Troubleshooting, pages 19 through 21

Note: The pilot fl ame on natural gas units will have a slight curve, but fl ame should be blue and have no yellow or orange color.

Pilot Burner

Thermocouple

Figure 22 - Correct Pilot Flame Pattern (Your pilot may vary from pilots shown)

Pilot Burner

INSPECTING BURNERS

17

Pilot Flame Pattern

Burner Flame Pattern

 

 

 

BURNER FLAME PATTERN

Figure 24 shows correct burner fl ame pattern.

NOTICE: Do not mistake orange flames with yellow tipping. Dirt or other fine particles are burned by heater, causing brief patches of orange flame.

If burner fl ame pattern is incorrect, as shown in Figure 25

turn heater off (see To Turn Off Gas to Appliance, page 15)

see Troubleshooting, pages 19 through 21

Blue and bright

Yellow fl ames

Figure 24 - Correct Burner Flame Pattern

Darker orange mes

Figure 25 - Incorrect Burner Flame Pattern

Thermocouple

Figure 23 - Incorrect Pilot Flame Pattern (Your pilot may vary from pilots shown)

The fl ames from the burner travel horizontally through the log set and emerge at the middle and rear of the set against the back logs.

The fl ames are blue off the burner and as they progress through the log set, change to a light yellow color, yellow decorative fl ames are visible as the fl ames exit the log set.

The base of the log set and the underside of the top logs glow red. Natural gas models will burn with more blue fl ame, while propane gas model will burn with bright yellow fl ame.

114745-01

For more information, visit www.desatech.com

Image 17
Contents What to do if YOU Smell GAS Unvented Vent Free GAS LOG HeaterTable of Contents Local Codes Safety Information Product IdentificationProduct Features Optional Remote Control AccessoriesSafety Device Local CodesDetermining if You Have a Confined or Unconfined Space Determining FRESH-AIR Flow for Appliance LocationVentilation Air From Inside Building Ventilation AIRCheck GAS Type InstallationMinimum Noncombustible material Clearences InstallationFloor Clearances InstallationMantel Clearances Attaching Damper Clamp Installing Heater AssemblyConnecting to GAS Supply InstallationNatural Checking GAS ConnectionsPROPANE/LP Checking Gas Joints propane/LP only What to do if YOU Smell GAS Lighting InstructionsRemote Control Operation Manual Lighting ProcedureOperating Heater To Turn OFF GAS to ApplianceThermostat Control Operation Operating HeaterBurner Flame Pattern Pilot Flame PatternInjector Holder On Outlet Burner Tube Cleaning Burner Injector Holder and Pilot AIR Inlet HoleObserved Problem Possible Cause Remedy TroubleshootingTroubleshooting Troubleshooting VFRMV18NA VFRMV24NA SpecificationsService Hints Technical Service Replacement Parts Service HintsVFRMV18NA, VFRMV18PA VFRMV24NA, VFRMV24PA Illustrated Parts BreakdownPart Number for Parts ListReceiver and HAND-HELD Remote Control KIT Ghrcb AccessoriesWALL-MOUNT Thermostat Switch GWMT1 WALL-MOUNT ON/OFF Switch GWMS2This page Intentionally Left OWNER’S Registration Form Postage Required 114745-01 Limited Warranty VENT-FREE GAS LOG Heaters Warranty Information

VFRMV24NA, VFRMV18NA, VFRMV18PA specifications

The Desa VFRMV18NA, VFRMV18PA, and VFRMV24NA are advanced heating solutions designed to efficiently warm residential spaces while providing enhanced user comfort and convenience. These models are part of the VFRMV series, known for their reliability, innovative technology, and energy efficiency.

One of the main features of the VFRMV series is its variable refrigerant flow (VRF) technology. This allows the system to modulate the amount of refrigerant sent to each indoor unit based on the current heating or cooling load, resulting in optimal energy consumption. This flexibility not only saves energy but also ensures that the desired temperature can be quickly achieved and maintained across different rooms.

The VFRMV18NA and VFRMV18PA models are designed for residential use, with the VFRMV18PA specifically including additional features for enhanced performance in various climatic conditions. They come equipped with inverter-driven compressors, which adjust their speed to meet demand, leading to quieter operation and improved efficiency. This inverter technology ensures that energy consumption decreases during periods of lower demand, making these models environmentally friendly and cost-effective.

The VFRMV24NA model, with its higher capacity, is suitable for larger spaces or homes needing additional heating and cooling power. Like its counterparts, it features a high SEER (Seasonal Energy Efficiency Ratio) and HSPF (Heating Seasonal Performance Factor) ratings, indicating its efficiency in energy use, which translates into savings on energy bills for homeowners.

In terms of characteristics, all three models incorporate user-friendly controls, allowing homeowners to easily adjust settings and schedule operations. Smart technology integration enables remote monitoring and control via mobile apps, giving users the ability to manage their indoor climate on the go.

Additionally, the VFRMV series features advanced filtration systems that improve indoor air quality by capturing dust and allergens, making these models an excellent choice for households with allergy sufferers. The units are also designed with sleek, modern aesthetics, ensuring they blend seamlessly with a variety of interior designs.

In summary, the Desa VFRMV18NA, VFRMV18PA, and VFRMV24NA offer cutting-edge technology, impressive efficiency, and user-friendly features. With their VRF technology, inverter-driven compressors, and smart controls, these heating solutions provide an ideal choice for homeowners seeking comfort, efficiency, and convenience in their indoor environments.